Eltek WBK6 Water Block Safety Flow Kit #6, 3/8 Inch MAX Adapter x 1/4 Inch Quick Connect, with Shutoff Valve

  • Model: HHD WBK6
  • Manufactured by: HHD

$72.55

Add to Cart:
The Eltek WBK6 Water Block Safety Flow Kit #6 is a mechanical water overflow protection system designed to help prevent excessive water discharge from commercial coffee brewers, beverage dispensers, water filtration systems, and other water-fed equipment. Manufactured by ELTEK Group, the Water Block monitors the volume of water passing through the valve and automatically shuts off the water supply when the preset continuous flow volume is exceeded.

The WBK6 features a 3/8 Inch MAX Adapter inlet, 1/4 Inch Quick Connect outlet, brass ball shutoff valve, and a 2 Inch copper tube elbow. This configuration provides a compact water supply protection solution with a convenient manual shutoff point for equipment servicing. Unlike electrically operated leak detection systems, the Water Block operates mechanically without electricity or batteries. Its adjustable design allows the maximum continuous water volume to be set between 1.3 and 13.2 gallons.

Features

Mechanical water overflow protection system
Automatically shuts off water when the preset continuous flow volume is exceeded
Adjustable shutoff volume from 1.3 to 13.2 gallons
Requires no electricity, batteries, or electronic controls
Automatically resets measured water volume during normal flow cycles
Manual reset required after safety shutoff activation
3/8 Inch MAX Adapter inlet connection
1/4 Inch Quick Connect outlet connection
Includes brass ball valve for manual water shutoff
Includes 2 Inch copper tube elbow
Includes Water Block valve with key and instructions
Includes 2 Inch filter clip
Compact configuration without a braided supply line
Designed for vertical installation only

Specifications

Manufacturer: ELTEK Group
Part Number: WBK6
Product Type: Water Block Safety Flow Kit #6
Operation: Mechanical Water Flow Monitoring
Adjustable Continuous Flow Volume: 1.3 to 13.2 Gallons
Burst Pressure: 725 PSI
Maximum Static Pressure: 145 PSI
Minimum Flow Rate: 0.5 GPM
Maximum Water Temperature: 158 F
Water Block Inlet: 3/4 Inch Male Garden Hose Thread
Water Block Outlet: 3/4 Inch Female Garden Hose Thread
Kit Inlet Connection: 3/8 Inch MAX Adapter
Kit Outlet Connection: 1/4 Inch Quick Connect
Copper Tube Elbow: 3/8 Inch x 2 Inch
Manual Shutoff Valve: Included
Rated Service Life: Approximately 80,000 Gallons
Power Requirements: None
Installation Orientation: Vertical Only

Kit Includes

(1) WB - Water Block Safety Valve with Key and Assembly Instructions
(1) MGH6C - Male Garden Hose Adapter with 3/8 Inch Compression
(1) LGH4 - Liquifit 1/4 Inch Quick Connect x 3/4 Inch Garden Hose Fitting
(1) CTE6-2 - 3/8 Inch x 2 Inch Copper Tube Elbow
(1) MAXBV6 - 3/8 Inch MAX Adapter Ball Valve x Compression
(1) OC - 2 Inch Filter Clip

Common Applications

Commercial coffee brewing equipment
Automatic-fill coffee brewers
Commercial beverage dispensing systems
Water filtration systems with compatible connections
Office coffee service equipment
Restaurant and convenience store beverage stations
Water-fed equipment requiring continuous flow protection
Commercial beverage equipment installations

Installation Information

The Eltek Water Block must be installed in a vertical position for proper operation. The adjustable shutoff volume should be selected according to the normal water consumption of the connected equipment. If the volume of water passing through the valve continuously exceeds the selected limit, the Water Block shuts off the water supply and remains closed until manually reset using the supplied key or the appropriate manufacturer reset procedure.

The WBK6 includes a 3/8 Inch MAX Adapter ball shutoff valve, 2 Inch copper tube elbow, and the fittings required for its specified inlet and outlet configuration. The ball valve provides a convenient manual shutoff point for maintenance, filter replacement, or equipment servicing. The kit does not include a separate Water Block Reset Device (WBRD) or a stainless steel braided supply line.

The Water Block is designed to respond to excessive continuous water flow rather than detect moisture or standing water. It does not replace a conventional leak detection system and may not stop small leaks or intermittent water loss that remains below the selected shutoff volume.

The Eltek WBK6 Water Block Safety Flow Kit provides an additional layer of protection for commercial beverage equipment connected to a pressurized water supply. A leaking fitting, failed inlet valve, or other water system malfunction can allow water to flow continuously, potentially causing equipment damage and costly cleanup. By limiting the maximum continuous volume delivered to the equipment, the Water Block helps reduce the amount of water released during certain plumbing or equipment failures.

Compared with the WBK2 kit, the WBK6 includes the same general copper elbow and ball valve configuration but does not include the separate WBRD Water Block Reset Device. For installations requiring a flexible 36 Inch stainless steel braided supply line, the WBK3 and WBK4 kits offer alternative configurations. Selecting the appropriate kit helps ensure the included fittings and accessories match the intended water supply installation.

Verify the 3/8 Inch MAX Adapter inlet, 1/4 Inch Quick Connect outlet, operating pressure, water flow requirements, and available installation space before ordering. The Water Block must be installed vertically and adjusted to accommodate the normal water consumption of the connected equipment.
  1. Home
  2. Accessories
  3. Eltek WBK6 Water Block Safety Flow Kit #6, 3/8 Inch MAX Adapter x 1/4 Inch Quick Connect, with Shutoff Valve
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart