HHD FN4 Brass Flare Nut - 1/4 Inch

  • Model: HHD FN4
  • Manufactured by: HHD

$0.82

Add to Cart:
The HHD FN4 Brass Flare Nut is a 1/4 Inch fitting designed to secure compatible flared tubing connections in commercial coffee equipment, beverage dispensing systems, and water supply plumbing. Supplied by Holiday House Distributing, this replacement nut is useful when repairing or assembling water lines that use standard flare-style connections.

The FN4 works with a properly prepared 1/4 Inch flared tube and a matching male flare fitting. As the nut is tightened, it draws the flared tubing end against the mating fitting to create a secure connection. Its brass construction and hexagonal wrench section make it a practical replacement for worn, damaged, or missing flare nuts.

Features

Brass flare nut for 1/4 Inch tubing connections
Designed for compatible male flare fittings
Helps secure properly flared tubing connections
Hexagonal wrench section for installation and removal
Compact fitting for commercial beverage equipment plumbing
Useful for water line maintenance and repairs
Replacement for damaged, worn, or missing flare nuts

Specifications

Brand: Holiday House Distributing
Part Number: FN4
Product Type: Flare Nut
Material: Brass
Nominal Flare Size: 1/4 Inch
Connection Type: Female Flare Nut
Configuration: Straight
Category: Brass Flare Fittings - Nuts

Common Applications

Commercial coffee brewer water lines
Beverage dispensing equipment plumbing
Water filtration system connections
Securing compatible 1/4 Inch flared tubing
Replacing damaged or missing flare nuts
Maintenance of existing flare fitting assemblies

Related Products

HHD FN6 - 3/8 Inch Brass Flare Nut
HHD FC4 - 1/4 Inch Male Flare x 1/4 Inch MPT Connector
HHD FC42 - 1/4 Inch Male Flare x 1/8 Inch MPT Connector
HHD FC46 - 1/4 Inch Male Flare x 3/8 Inch MPT Connector
HHD FC48 - 1/4 Inch Male Flare x 1/2 Inch MPT Connector
HHD FCE4 - 1/4 Inch Male Flare x 1/4 Inch MPT Elbow
HHD FCE42 - 1/4 Inch Male Flare x 1/8 Inch MPT Elbow
HHD FCE46 - 1/4 Inch Male Flare x 3/8 Inch MPT Elbow

California Proposition 65 Information

For additional information about California Proposition 65 and applicable product warnings, visit the Holiday House Distributing Proposition 65 Information page.

Installation Information

Slide the flare nut onto the tubing before forming the flare. Prepare the tubing end using the appropriate flaring tool and verify that the finished flare is smooth, properly formed, and free from cracks or distortion.

Position the flared tubing against a compatible male flare fitting and tighten the nut according to the fitting manufacturer's installation requirements. Flare connections seal at the mating flare surfaces rather than at the threads, so thread sealant should not be applied to the flare nut threads unless specifically directed by the manufacturer.

The HHD FN4 provides an economical way to replace a damaged or missing 1/4 Inch flare nut without replacing an otherwise serviceable tubing assembly. It is especially useful during commercial coffee brewer and beverage equipment repairs where an existing flare connection needs to be restored.

For a dependable connection, inspect the tubing flare and mating fitting before reassembly. A damaged flare or sealing surface may require additional component replacement rather than simply installing a new nut.

Verify the tubing size, flare type, and mating fitting compatibility before ordering. This listing is for the HHD FN4 brass flare nut only; tubing and mating fittings are sold separately.
  1. Home
  2. Fittings
  3. Brass Flare Fittings
  4. Nuts
  5. HHD FN4 Brass Flare Nut - 1/4 Inch
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart