The HHD FP4 Brass Flare Plug is a lead-free 1/4 Inch male flare fitting designed to close an unused female flare connection in commercial coffee equipment, beverage dispensing systems, and compatible water supply plumbing. Supplied by Holiday House Distributing, this brass plug provides a convenient solution when a flare connection needs to be sealed during equipment installation, maintenance, or repair.
The FP4 features a male flare sealing surface, external flare threads, and a hexagonal head for wrench installation. When installed in a compatible 1/4 Inch female flare fitting, the plug closes the connection without requiring additional tubing or adapters. Its lead-free brass construction makes it suitable for compatible potable water applications.
Features Lead-free brass flare plug
1/4 Inch male flare connection
Designed to close compatible female flare fittings
Male flare sealing surface
Hexagonal head for wrench installation
Compact design for tight plumbing installations
Useful for closing unused water line connections
Suitable for compatible potable water applications
Replacement for damaged or missing flare plugs
Specifications Brand: Holiday House Distributing
Part Number: FP4
Product Type: Male Flare Plug
Material: Lead-Free Brass
Nominal Flare Size: 1/4 Inch
Connection Type: Male Flare
Configuration: Plug
Application: Closing Compatible Female Flare Connections
Category: Brass Flare Fittings - Plugs
Common Applications Closing unused 1/4 Inch female flare connections
Commercial coffee brewer water supply plumbing
Beverage dispensing equipment maintenance
Water filtration system plumbing
Sealing unused flare fitting outlets
Equipment repairs and plumbing modifications
Replacing worn or damaged flare plugs
Related Products HHD FP6 - 3/8 Inch Brass Flare Plug
HHD FN4 - 1/4 Inch Brass Flare Nut
HHD FC4 - 1/4 Inch Male Flare x 1/4 Inch MPT Connector
HHD FC42 - 1/4 Inch Male Flare x 1/8 Inch MPT Connector
HHD FC46 - 1/4 Inch Male Flare x 3/8 Inch MPT Connector
HHD FCE4 - 1/4 Inch Male Flare x 1/4 Inch MPT Elbow
Lead-Free Brass Information The HHD FP4 is manufactured from lead-free brass for compatible potable water plumbing applications. Lead-free brass fittings are commonly used in commercial coffee brewers, beverage dispensers, and water filtration systems where drinking water comes into contact with plumbing components.
Using properly matched lead-free fittings helps maintain suitable water supply connections while meeting applicable material requirements for potable water installations.
California Proposition 65 Information For additional information about California Proposition 65 and applicable product warnings, visit the
Holiday House Distributing Proposition 65 Information page.
Installation Information Shut off the water supply and relieve system pressure before removing or installing plumbing fittings. Inspect the female flare connection for damaged threads, scratches, or deformation that could interfere with proper sealing.
Thread the FP4 into a compatible 1/4 Inch female flare fitting by hand to avoid cross-threading. Tighten using the hexagonal head according to the fitting manufacturer's installation requirements. The connection seals at the mating flare surfaces rather than at the threads, so thread sealant should not be applied to the flare threads unless specifically directed by the manufacturer.
After installation, restore the water supply and inspect the connection for leaks.
The HHD FP4 is a practical solution when an unused 1/4 Inch flare connection must be closed without replacing the existing fitting or plumbing assembly. It can be useful during commercial coffee brewer repairs, beverage equipment modifications, or water line maintenance where an unused connection needs to remain sealed.
Replacing a damaged or missing flare plug can help restore a dependable connection while allowing other serviceable plumbing components to remain in place. The compact brass construction and hexagonal head make the FP4 convenient for routine service work.
Verify the 1/4 Inch flare size, connection type, and equipment compatibility before ordering. This listing is for the HHD FP4 brass flare plug only.