The HHD HBMF4 Hose Barb to Male Flare Adapter is a lead-free brass fitting designed to connect compatible 1/4 Inch inside diameter flexible tubing to a 1/4 Inch female flare connection. Supplied by Holiday House Distributing, this straight adapter provides a convenient transition between flexible water lines and flare-style connections commonly found in commercial coffee equipment, beverage dispensing systems, and water supply installations.
Manufactured from lead-free brass, the HBMF4 features a barbed hose connection on one end and a male flare connection on the other. The hose barb helps grip properly sized flexible tubing, while the male flare end provides a connection to a matching female flare fitting. Its compact, straight-through design makes it useful for equipment installation, maintenance, and replacement of worn or damaged plumbing fittings.
Features Lead-free brass construction
1/4 Inch hose barb connection
1/4 Inch male flare connection
Straight hose barb to male flare adapter
Barbed stem designed for compatible flexible tubing
Male flare end designed for a matching female flare fitting
Hexagonal wrench section for installation
Compact design for beverage equipment and water line connections
Suitable for new installations and replacement applications
Specifications Manufacturer: Holiday House Distributing
Part Number: HBMF4
Product Type: Hose Barb to Male Flare Adapter
Material: Lead-Free Brass
Hose Barb Size: 1/4 Inch
Male Flare Size: 1/4 Inch
Configuration: Straight
Connection Type: Hose Barb x Male Flare
Finish: Natural Brass
Common Applications Commercial coffee brewer water supply connections
Beverage dispensing equipment
Water filtration system plumbing
Flexible tubing to flare fitting transitions
Commercial beverage equipment installation and maintenance
Replacement of damaged or leaking hose barb adapters
Compatible potable water supply connections
Related Products HHD HBMF46 - 1/4 Inch Hose Barb to 3/8 Inch Male Flare Adapter
HHD HBFF4 - 1/4 Inch Hose Barb to 1/4 Inch Female Flare Adapter
HHD HBFF46 - 1/4 Inch Hose Barb to 3/8 Inch Female Flare Adapter
HHD HBS4 - 1/4 Inch Brass Hose Barb Splicer
HHD HBT4 - 1/4 Inch Brass Hose Barb Tee
HHD FU4 - 1/4 Inch Brass Flare Union
HHD SMF4 - 1/4 Inch Compression Stem to 1/4 Inch Male Flare Adapter
Lead-Free Brass Information The HHD HBMF4 is identified as a lead-free brass fitting. Lead-free brass is commonly used for compatible drinking water and beverage equipment plumbing applications. Confirm that the fitting meets the requirements of the intended installation, including any applicable local plumbing codes and equipment manufacturer specifications.
California Proposition 65 Information For additional information regarding California Proposition 65 warnings associated with products distributed by Holiday House Distributing, please visit the
Holiday House Distributing California Proposition 65 Warning page.
Installation Information Connect the 1/4 Inch hose barb end to compatible flexible tubing with the appropriate inside diameter. Use a suitable tubing clamp or other approved retention method when required by the tubing or equipment manufacturer.
The 1/4 Inch male flare connection is designed to mate with a compatible female flare fitting. Flare connections seal at their mating surfaces rather than through the threads. Do not apply thread sealant or PTFE tape to the flare sealing surfaces. Inspect both mating surfaces for damage, tighten using appropriate tools, and check for leaks after installation.
The HHD HBMF4 is particularly useful when a flexible water line must connect to equipment or plumbing components equipped with a female flare connection. Rather than replacing an entire tubing assembly, a properly sized adapter may provide a straightforward solution when repairing or modifying an existing water supply line.
Commercial coffee brewers and beverage dispensing equipment often use combinations of flexible tubing, compression fittings, flare connections, and threaded adapters. Selecting the correct fitting helps maintain a secure connection and reduces the risk of leaks caused by mismatched tubing or connection sizes.
Whether installing new beverage equipment, servicing a water filtration system, or replacing an existing fitting, the Holiday House Distributing HBMF4 provides a compact lead-free brass transition between a 1/4 Inch hose barb and a 1/4 Inch male flare connection.
Verify the tubing inside diameter, 1/4 Inch male flare connection, mating fitting type, operating conditions, and equipment compatibility before ordering. This listing is for the HHD HBMF4 hose barb to male flare adapter only.