HHD TC157 Oetiker One Ear Hose Clamp .453-.615 Inch for PT6RF Tubing

  • Model: HHD TC157
  • Manufactured by: HHD

$0.42

Add to Cart:
The HHD TC157 Oetiker One Ear Hose Clamp is a metal tubing clamp with a listed clamping range of .453 to .615 Inch. Supplied by Holiday House Distributing, this one-ear clamp is identified for use with PT6RF beverage tubing and is designed to help secure compatible flexible tubing to hose barb fittings. It is suitable for properly matched connections in commercial coffee equipment, beverage dispensing systems, water filtration installations, and other appropriate fluid-handling applications.

The TC157 features a circular metal band with a raised ear that is compressed using an appropriate Oetiker ear clamp installation tool. When correctly sized and installed, the clamp applies compression around the tubing to help retain it on the mating hose barb fitting. Unlike nylon tubing support clamps that attach water lines to mounting surfaces, the TC157 is intended to secure the tubing at the connection itself. This listing is for one individual clamp.

Features

Oetiker one-ear hose clamp design
Listed clamping range of .453 to .615 Inch
Identified for use with HHD PT6RF beverage tubing
Metal band construction
Raised ear for mechanical crimping
Helps secure compatible tubing to hose barb fittings
Compact design without a protruding adjustment screw
Suitable for properly matched flexible tubing connections
Useful for commercial beverage equipment plumbing
Suitable for new installations and replacement assemblies
Designed for installation with an appropriate ear clamp crimping tool

Specifications

Distributor: Holiday House Distributing
Brand: Oetiker
Part Number: TC157
Product Type: One Ear Hose Clamp
Clamp Size Range: .453-.615 Inch
Minimum Listed Diameter: .453 Inch
Maximum Listed Diameter: .615 Inch
Construction: Metal Band
Clamp Style: One Ear Tab
Compatible Tubing: HHD PT6RF
Installation Method: Mechanical Ear Crimping
Quantity: 1 Clamp

Compatible Tubing

HHD PT6RF - Braid-Reinforced Beverage Tubing

Common Applications

Securing PT6RF beverage tubing to compatible hose barb fittings
Commercial coffee brewer water line connections
Beverage dispensing equipment plumbing
Water filtration tubing assemblies
Replacement of damaged or previously installed ear clamps
Commercial beverage equipment repair and maintenance
New flexible tubing connections requiring a one-ear clamp
Maintenance of compatible PT6RF tubing assemblies

Related Products

HHD PT6RF - Compatible Braid-Reinforced Beverage Tubing
HHD TC113 - Oetiker One Ear Hose Clamp .381-.444 Inch for PT6W/B Tubing
HHD TC123 - Oetiker One Ear Hose Clamp .394-.486 Inch for PT4R/PT4RF Tubing
HHD TC133 - Oetiker One Ear Hose Clamp .453-.524 Inch for PT4R Tubing
HHD TC140 - Oetiker One Ear Hose Clamp .472-.551 Inch
HHD TC185 - Oetiker One Ear Hose Clamp .602-.725 Inch for PT6R Tubing
HHD TC717 - Oetiker One Ear Hose Clamp .717-.827 Inch

Installation Information

Before installation, verify the outside diameter of the tubing after it is positioned over the hose barb fitting. The TC157 has a listed clamping range of .453 to .615 Inch. The correct clamp must be selected according to the assembled tubing and fitting dimensions rather than the nominal tubing inside diameter alone.

Slide the clamp over the tubing before inserting the hose barb fitting. Fully seat the tubing onto the appropriate fitting according to the tubing and fitting manufacturer's instructions, then position the clamp over the intended clamping area. Make sure the clamp is properly located on the tubing and is not positioned over the end of the fitting.

Use an appropriate Oetiker ear clamp installation tool to compress the raised ear according to the manufacturer's recommended procedure. Apply the specified compression without damaging the clamp, tubing, or fitting. Do not use ordinary pliers as a substitute unless the tool manufacturer specifically approves their use.

One-ear clamps are generally intended for permanent installation rather than repeated adjustment. A clamp that has already been crimped should not be assumed suitable for reuse. When rebuilding a connection, use a new correctly sized clamp and inspect the tubing and fitting for damage.

After installation, examine the crimped ear and surrounding tubing for improper positioning, deformation, or damage. Restore the water supply and check the completed connection for leaks under the equipment's normal operating conditions.

The HHD TC157 provides a compact clamping solution for compatible PT6RF beverage tubing connections. Commercial coffee brewers, beverage dispensers, and water filtration systems frequently use hose barb fittings to connect flexible water lines to internal components. A properly selected and installed clamp helps retain the tubing at these connection points.

The one-ear design differs from conventional worm-drive hose clamps, which use a screw mechanism for tightening. Instead, the TC157 uses a raised metal ear that is compressed during installation. This design eliminates the protruding adjustment screw found on many conventional hose clamps and can be useful where available space is limited.

Clamp sizing is especially important when working with reinforced beverage tubing. The reinforcing material and tubing wall thickness can affect the outside diameter of the tubing. The assembled diameter may also change when the tubing is expanded over a hose barb fitting. For this reason, the actual connection dimensions must be considered when selecting the correct clamp.

Holiday House Distributing identifies the TC157 for PT6RF tubing. This provides a useful compatibility reference for technicians servicing existing PT6RF water lines or assembling new connections. However, the listed .453-.615 Inch clamp range and the mating hose barb fitting dimensions must still be verified before installation.

The TC157 and TC185 are identified for different tubing products. The TC157 is listed for PT6RF tubing, while the TC185 is identified for PT6R tubing. Although their clamping ranges overlap slightly, the two clamps should not automatically be considered interchangeable. The appropriate clamp depends on the tubing construction, assembled outside diameter, and fitting dimensions.

The TC157 also has an overlapping size range with the TC133 and TC140 clamps. The TC133 is identified for PT4R tubing, while the TC140 carries the manufacturer's 505 application reference. These clamps may appear similar, but their different listed ranges and application references should be considered when selecting replacement parts.

Unlike the HHD TC4, TC6, TC8, and TC12 nylon tubing support clamps, the TC157 is intended for securing compatible tubing connections rather than mounting tubing to a cabinet or equipment panel. It should also not be confused with the KR-series ferrules, which require their own specified crimping tools and installation procedures.

When replacing an existing ear clamp, inspect the hose barb fitting for corrosion, damage, or wear and examine the tubing for cracking, hardening, stretching, or deformation. Installing a new clamp on damaged tubing may not restore a reliable connection. Replace worn components as needed before assembling the joint.

For commercial beverage equipment technicians, keeping properly sized ear clamps available can simplify routine tubing replacement and plumbing repairs. The TC157 is particularly useful when servicing compatible PT6RF tubing assemblies requiring a clamp within the listed .453 to .615 Inch range.

Whether assembling a new beverage tubing connection or replacing an existing clamp during equipment maintenance, the Holiday House Distributing TC157 Oetiker One Ear Hose Clamp provides a listed .453-.615 Inch clamping range for compatible PT6RF tubing applications.

Verify the assembled tubing outside diameter, listed .453-.615 Inch clamp range, PT6RF tubing compatibility, hose barb fitting dimensions, installation tool requirements, and equipment operating conditions before ordering. This listing is for one HHD TC157 Oetiker One Ear Hose Clamp. Tubing, fittings, and installation tools are not included.
  1. Home
  2. Fittings
  3. Hose Barb Accessories
  4. OETIKER One Ear Tab Clamps
  5. HHD TC157 Oetiker One Ear Hose Clamp .453-.615 Inch for PT6RF Tubing
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart