HHD SE Swivel Elbow 1/4 Inch Female x 1/4 Inch Male

  • Model: HHD SE
  • Manufactured by: HHD

$9.30

Add to Cart:
The Holiday House Distributing SE Swivel Elbow is a 90-degree plumbing fitting designed to connect compatible 1/4 inch female and 1/4 inch male threaded connections. Featuring a swivel nut on the female connection and a male threaded outlet positioned at a right angle, this specialty fitting provides a convenient way to change the direction of a water supply connection in commercial coffee brewers, beverage dispensers, water filtration systems, and other compatible equipment.

The SE is particularly useful when a straight plumbing connection would interfere with surrounding equipment or require additional tubing bends. Its compact elbow configuration allows the connection to turn 90 degrees, while the swivel nut provides flexibility when positioning the fitting during installation. This makes it a practical replacement component for equipment maintenance, water supply repairs, and plumbing modifications.

Features

90-degree swivel elbow configuration
1/4 inch female threaded connection
1/4 inch male threaded connection
Swivel nut on female connection
Hexagonal swivel nut for wrench tightening
Changes the direction of a threaded connection by 90 degrees
Compact design for confined equipment installations
Useful for commercial coffee and beverage equipment plumbing
Suitable for compatible water filtration connections
Convenient for replacement and repair applications

Specifications

Manufacturer: Holiday House Distributing
Part Number: SE
Product Type: Swivel Elbow
Connection 1: 1/4 Inch Female
Connection 2: 1/4 Inch Male
Configuration: 90-Degree Elbow
Female Connection: Swivel Nut
Design: Hexagonal Swivel Nut
Material: Verify With Manufacturer
Thread Style: Verify With Manufacturer

Common Applications

Commercial coffee brewer water supply connections
Beverage dispenser installation and maintenance
Water filtration system plumbing
Redirecting compatible 1/4 inch threaded connections
Equipment installations with limited plumbing clearance
Replacement of damaged or worn swivel elbows
Water supply line repairs and modifications
Connecting compatible fittings at a 90-degree angle

The Holiday House Distributing SE Swivel Elbow provides a practical solution when a water supply connection must change direction without adding multiple separate fittings. Its 90-degree configuration allows compatible plumbing components to be joined at a right angle, helping simplify installations in confined spaces behind coffee brewers, beneath countertops, and inside beverage equipment cabinets.

The swivel nut is an important feature of this fitting. Unlike a fixed female threaded connection, a swivel nut can rotate during installation, allowing the fitting to be positioned while the connection is tightened. This can be particularly helpful when the elbow must face a specific direction to accommodate the routing of tubing or other plumbing components.

The male threaded connection extends from the elbow body at a right angle to the swivel connection. This configuration can help reduce the need for sharp tubing bends and additional adapters when routing a water supply line around equipment components. Proper connection alignment is important to avoid unnecessary stress on the fitting and connected plumbing.

When replacing an existing swivel elbow, compare the original fitting with the HHD SE to confirm the connection sizes, thread styles, and sealing surfaces. Female swivel fittings may use different sealing methods depending on their design. Pipe thread, compression, and flare connections are not automatically interchangeable, even when their nominal sizes are the same.

Before installation, shut off the water supply and relieve any remaining pressure. Inspect the mating connections and sealing surfaces for wear or damage. Install the fitting using the appropriate sealing components and tightening method specified for the connection type. Avoid overtightening the swivel nut, which may damage the fitting or sealing surfaces. After restoring water pressure, inspect both connections for leaks.

The HHD SE can be a useful replacement fitting for commercial beverage equipment service work, particularly when an existing 1/4 inch water supply connection requires a compact 90-degree elbow with a swivel female connection. Its configuration helps accommodate equipment plumbing layouts where a fixed straight fitting would be less convenient.

California Proposition 65 Warning

For applicable product safety information and California Proposition 65 warnings, visit Holiday House Distributing Proposition 65 Information.

Related Products

HHD PC4 - 1/4 Inch Male Pipe Thread Connector
HHD PC6 - 3/8 Inch Male Pipe Thread Connector
HHD PC64 - 3/8 Inch MPT x 1/4 Inch MPT Reducing Connector
HHD FPC4 - 1/4 Inch Female Pipe Connector
HHD FPTE6 - Bronze 3/8 Inch Female Pipe Elbow

The Holiday House Distributing SE Swivel Elbow offers a compact connection option for compatible commercial coffee equipment, beverage dispensing systems, and water supply plumbing. Its combination of a swivel female connection and right-angle male outlet makes it useful when installation space and connection orientation are important considerations.

Verify part number SE, 1/4 inch female and male connection types, thread specifications, sealing requirements, and equipment compatibility before ordering.
  1. Home
  2. Fittings
  3. Specialty Fittings
  4. Swivel Elbows
  5. HHD SE Swivel Elbow 1/4 Inch Female x 1/4 Inch Male
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart