The Holiday House Distributing SN6L Swivel Nut Connector is a 6 inch copper tubing assembly designed to connect two compatible 1/4 inch male flare fittings. Featuring 1/4 inch outside diameter copper tubing with a female flare swivel nut on each end, this preassembled connector is useful for commercial coffee brewers, beverage dispensers, water filtration systems, and other water-connected equipment.
The SN6L comes with the copper tubing already cut, deburred, and flared on both ends, eliminating the need to prepare tubing and install separate flare nuts. The 6 inch copper tube can be carefully bent to accommodate the spacing and position of equipment components, making it a convenient replacement for existing water supply connections.
Features 6 inch copper tubing connector
1/4 inch outside diameter copper tubing
1/4 inch female flare swivel nut on each end
Two swivel nuts for connecting compatible male flare fittings
Pre-cut, deburred, and flared tubing ends
Copper tubing can be carefully bent to fit equipment connections
Hexagonal swivel nuts for wrench tightening
Useful for commercial coffee and beverage equipment plumbing
Specifications Manufacturer: Holiday House Distributing
Part Number: SN6L
Product Type: Copper Tubing Connector Assembly
Connection 1: 1/4 Inch Female Flare Swivel Nut
Connection 2: 1/4 Inch Female Flare Swivel Nut
Tubing Material: Copper
Tubing Outside Diameter: 1/4 Inch
Tubing Length: 6 Inches
Tubing Preparation: Cut, Deburred, and Flared on Both Ends
Configuration: Straight Tubing Assembly, Bendable for Installation
Common Applications Commercial coffee brewer water supply connections
Beverage dispenser installation and maintenance
Connecting two compatible 1/4 inch male flare fittings
Replacing damaged or leaking copper tubing assemblies
Water filtration system plumbing connections
Equipment repairs requiring pre-flared copper tubing
Connections requiring a longer tube than the HHD SN4
The Holiday House Distributing SN6L provides a convenient solution when two equipment components must be connected with a 6 inch length of copper tubing. Its prepared flare connections eliminate the need for separate tubing fabrication, while the additional length provides greater flexibility when routing water lines between valves, fittings, and other equipment components. Use appropriate bending techniques to avoid kinking or restricting the copper tube.
For shorter connections, the HHD SN4 provides the same 1/4 inch flare configuration with a 4 inch copper tube. Flare fittings are not interchangeable with compression or standard pipe thread connections. Confirm the required tubing length, mating flare connections, and equipment clearance before installation. Inspect both connections for leaks after restoring water pressure.
California Proposition 65 Warning For applicable product safety information and California Proposition 65 warnings, visit
Holiday House Distributing Proposition 65 Information.
Related Products HHD SN4 - Lead-Free 1/4 Inch Flare x 1/4 Inch Flare Connector with 4 Inch Copper Tube
HHD SN - 1/4 Inch Flare Swivel Nut, Replaces Newco 100161
HHD SN46 - 1/4 Inch Flare x 3/8 Inch Flare Reducing Swivel Connector
HHD SN6 - 3/8 Inch Flare x 3/8 Inch Flare Swivel Connector
Verify part number SN6L, 6 inch tubing length, 1/4 inch outside diameter copper tubing, flare connection sizes, and equipment compatibility before ordering.