HHD SCC300-44 Stainless Steel Braided Connection Line - 25 Foot - 1/4 Inch Compression x 1/4 Inch Compression

  • Model: HHD SCC300-44
  • Manufactured by: HHD

$39.78

Add to Cart:
The HHD SCC300-44 Stainless Steel Braided Connection Line is a 25-foot flexible water supply hose featuring 1/4 Inch compression connections on both ends. Designed for compatible commercial beverage equipment, coffee brewing systems, water filtration installations, and foodservice applications, this extended-length braided connection line provides a dependable solution for connecting equipment to water supplies located farther away. Its stainless steel braided construction combines strength and flexibility, making it a practical alternative to rigid tubing in installations requiring additional routing distance.

Distributed by Holiday House Distributing, SCC300-44 features an exclusive 12-point crimp design engineered to provide secure hose connections and withstand dramatic changes in water pressure. The nuts and end fittings are manufactured from nickel-plated brass, while the internal tubing is chloramine resistant for use with compatible treated water supplies. Rated for a working pressure of 160 PSI and an operating temperature range of 33 F to 140 F, this connection line is identified by HHD as IAPMO certified, NSF compliant, and meeting ASME A112.18.6 requirements.

Features

Stainless steel braided flexible water connection line
25-foot overall hose length
1/4 Inch compression connections on both ends
Exclusive 12-point crimp design for secure hose connections
Engineered to withstand dramatic changes in water pressure
Stainless steel braided exterior provides strength and flexibility
Nickel-plated brass nuts and end fittings
Chloramine-resistant internal tubing
160 PSI working pressure
Operating temperature range of 33 F to 140 F
IAPMO certified as specified by HHD
NSF compliant as specified by HHD
Meets ASME A112.18.6 requirements as stated by HHD
Extended 25-foot length for installations requiring additional reach
Flexible construction accommodates compatible equipment routing
Suitable for replacement water supply hoses and new installations
Factory-installed fittings eliminate the need to assemble hose ends

Specifications

Distributor: Holiday House Distributing (HHD)
Part Number: SCC300-44
Product Type: Stainless Steel Braided Connection Line
Hose Length: 25 Feet (300 Inches)
Connection 1: 1/4 Inch Compression
Connection 2: 1/4 Inch Compression
Exterior Construction: Stainless Steel Braided
End Fittings: Nickel-Plated Brass
Internal Tubing: Chloramine Resistant
Crimp Construction: 12-Point Crimp
Working Pressure: 160 PSI
Operating Temperature: 33 F to 140 F
Certification: IAPMO Certified
Compliance: NSF Compliant
Applicable Standard: ASME A112.18.6
Unit of Sale: One Braided Connection Line

Common Applications

Commercial coffee brewing equipment
Compatible beverage dispensing systems
Commercial water filtration equipment
Foodservice equipment water supply connections
Equipment installations requiring extended water supply lines
Replacement stainless steel braided connection hoses
Commercial kitchen and restaurant equipment
Water-fed appliances requiring 1/4 Inch compression connections
Equipment positioned away from the nearest water supply connection
Commercial beverage equipment maintenance and repairs
New installations requiring a 25-foot flexible water connection

Why Choose HHD SCC300-44 Braided Connection Line?

Commercial beverage equipment installations often require dependable water connections that can accommodate different equipment locations and plumbing configurations. The HHD SCC300-44 provides a 25-foot stainless steel braided connection line with 1/4 Inch compression fittings on both ends, making it a practical option for installations where shorter supply hoses cannot reach the available water connection.

One of the important features of this connection line is its exclusive 12-point crimp construction. HHD identifies this crimp design as exceeding typical industry-standard crimping methods, helping provide secure connections at the hose ends. This construction is particularly valuable in water supply systems where pressure changes may occur during normal equipment operation.

The stainless steel braided exterior provides structural reinforcement while allowing the hose to remain flexible enough for compatible installation routing. This can be beneficial when connecting commercial coffee brewers, beverage dispensers, filtration equipment, and other water-fed appliances. Proper routing helps reduce unnecessary strain on fittings and allows technicians to position the hose around equipment and other installation obstacles.

Chloramine resistance is another important consideration in commercial water supply applications. Many municipal water systems use chloramine as a disinfectant, making the compatibility of internal hose materials an important factor when selecting replacement connection lines. SCC300-44 incorporates chloramine-resistant internal tubing along with nickel-plated brass nuts and end fittings for use in appropriately specified water systems.

The hose is rated for a working pressure of 160 PSI and an operating temperature range of 33 F to 140 F. HHD also identifies the connection line as IAPMO certified, NSF compliant, and meeting ASME A112.18.6 requirements. These specifications help installers evaluate whether the product is appropriate for the intended water supply application.

The extended 25-foot length is especially useful when commercial equipment must be positioned some distance from the available water supply. Instead of joining multiple shorter connection hoses, a single properly installed line can provide the required reach while reducing the number of intermediate fittings and potential leak points. The hose should be routed without twisting, excessive bending, abrasion, or unnecessary tension.

Both ends feature 1/4 Inch compression connections, making it important to confirm that the equipment and water supply fittings are designed for this connection type. Compression fittings are not interchangeable with male pipe thread or other fitting configurations without appropriate adapters.

Whether installing new commercial beverage equipment, replacing an aging water supply hose, or connecting equipment located farther from the water source, HHD SCC300-44 provides an extended-length stainless steel braided connection option with reinforced crimp construction, chloramine-resistant tubing, and clearly defined operating specifications.

Related Stainless Steel Braided Connection Lines

Explore additional HHD stainless steel braided connection lines for commercial beverage equipment, water filtration systems, and compatible foodservice installations. Choose the correct hose length and connection configuration for your equipment.

HHD SCM36-46 - Stainless Steel Braided Connection Line, 3 Foot, 1/4 Inch Compression x 3/8 Inch MPT
HHD SCC96-66 - Stainless Steel Braided Connection Line, 8 Foot, 3/8 Inch Compression x 3/8 Inch Compression

The HHD SCC300-44 is sold individually as one complete 25-foot stainless steel braided connection line with factory-installed 1/4 Inch compression fittings on both ends. Its extended length, 12-point crimp construction, nickel-plated brass fittings, and chloramine-resistant tubing make it a practical option for compatible commercial water supply installations. Verify the required hose length, fitting sizes, connection types, operating pressure, temperature limits, and equipment compatibility before ordering.
  1. Home
  2. Tubing
  3. HHD SCC300-44 Stainless Steel Braided Connection Line - 25 Foot - 1/4 Inch Compression x 1/4 Inch Compression
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart