John Guest PE-16-GI-0250F-B 1/2 OD Polyethylene Tubing 250' Blue

John Guest PE-16-GI-0250F-B 1/2 OD Polyethylene Tubing 250' Blue. John Guest Polyethylene Tubing provides the benefits of a wide range of temperature and pressure suitability, broad chemical compatibility and is made from non-contaminating materials. Common applications are in water purification, water conditioners, ice makers, coffee brewers and vending machines. LLDPE is more robust than traditional low or medium density polyethylene and is recommended for use with cold and intermittent hot water.

John Guest Polyethylene Tubing is designed for use with John Guest Super Speedfit Push-in fittings, John Guest Shut-Off Valves and virtually all standard tubing connectors.

Maximum Working Temperature for John Guest Polyethylene Tubing is 150F at pressures shown below. Burst Pressures are approximately 3 times the maximum working pressure. If the tube is used in a warm water system a tube insert may be necessary.

Working Temperatures & Pressures

Tube OD 1/4", Tube ID .170", 230 PSI @ 70F
Tube OD 3/8", Tube ID .25", 120 PSI @ 150F
Tube OD 1/2", Tube ID .375" 90 PSI @150F
Tube OD 6mm, Tube ID 4mm 120 PSI @ 150F
Tube OD 8mm, Tube ID 6mm 90 PSI @150F

Maximum pressure rating for a system depends on the lowest rated component, eg. most John Guest fittings have a different rating than the tube ratings shown above.

Color - Blue
Size - (1) 250' Roll 1/2 OD