HHD B23820.1 Brass Water Strainer - 1/4 Inch Male Flare with Screen

  • Model: HHD B23820.1
  • Manufactured by: HHD

$18.45

Add to Cart:
The HHD B23820.1 Brass Water Strainer is designed to help protect commercial coffee brewers and beverage equipment by capturing sediment and particulate matter before it reaches downstream water control components. Featuring 1/4 Inch male flare connections and an internal strainer screen, this compact brass assembly provides a practical replacement solution for compatible commercial beverage equipment water supply installations.

Distributed by Holiday House Distributing, the B23820.1 measures approximately 3 1/2 Inches long by 1 Inch wide and is identified as a replacement for Bunn 23820.1000 and Newco 202003. HHD identifies this product as certified lead-free brass for potable water applications. Its internal screen helps capture debris that could otherwise reach valves and other water system components, while the availability of replacement screen HHD 5003064.004 provides a convenient maintenance option.

Features

Brass inline water strainer for commercial beverage equipment
1/4 Inch male flare connection design
Internal screen for capturing sediment and particulate matter
Helps protect downstream valves and water control components
Compact inline configuration
Brass construction for compatible water supply applications
HHD identifies the brass as certified lead-free
Suitable for compatible potable water installations
Approximately 3 1/2 Inches long
Approximately 1 Inch wide
Replacement for Bunn 23820.1000 as listed by HHD
Replacement for Newco 202003 as listed by HHD
Replacement screen available separately
Designed for compatible commercial coffee and beverage equipment
Useful for replacing worn, damaged, or clogged strainers

Specifications

Distributor: Holiday House Distributing (HHD)
Part Number: B23820.1
Product Type: Inline Water Strainer
Material: Brass
Lead-Free Status: Certified Lead-Free Brass as Stated by HHD
Connection Designation: 1/4 Inch Male Flare
Screen: Included
Length: 3 1/2 Inches
Width: 1 Inch
Replacement Screen: HHD 5003064.004
Replaces Bunn Part Number: 23820.1000
Replaces Newco Part Number: 202003
Application: Compatible Commercial Coffee and Beverage Equipment
Unit of Sale: One Strainer Assembly

Common Applications

Commercial Bunn coffee brewing equipment
Compatible Newco coffee brewers
Restaurant and foodservice beverage equipment
Commercial coffee brewer water supply connections
Incoming water supply sediment screening
Protection of downstream water valves and fittings
Replacement of Bunn 23820.1000
Replacement of Newco 202003
Routine maintenance of commercial beverage water systems
Water supply installations requiring compatible 1/4 Inch flare connections

Why Choose HHD B23820.1 Brass Water Strainer?

Sediment and particulate matter in incoming water can contribute to maintenance problems in commercial coffee brewing equipment. Small particles may enter valves, fittings, and other water control components, potentially restricting water flow or interfering with normal operation. Installing a properly selected inline strainer helps capture debris before it reaches sensitive downstream equipment.

The HHD B23820.1 features an internal screen designed to mechanically capture particulate matter carried through the water supply. This provides a practical first stage of sediment protection for compatible commercial coffee brewers and beverage equipment. A properly maintained strainer can help reduce the amount of debris entering downstream components.

One of the most useful advantages of the B23820.1 is its manufacturer cross-reference information. HHD identifies this strainer as a replacement for Bunn 23820.1000 and Newco 202003. These references can help service technicians and equipment owners locate a suitable replacement when maintaining compatible coffee brewing equipment.

The compact brass construction provides a durable housing for the internal screening component. Measuring approximately 3 1/2 Inches long by 1 Inch wide, the assembly is designed for installations where a relatively small inline water strainer is required. Its compact size can be useful in commercial beverage equipment plumbing arrangements where available space is limited.

HHD identifies this product as certified lead-free brass and states that it complies with applicable drinking water requirements, including the Safe Drinking Water Act and California AB1953. This is an important consideration when selecting brass components for potable water supply applications.

The 1/4 Inch male flare connection designation is another important selection detail. Flare fittings are different from standard pipe threads, compression connections, and push-to-connect fittings. Selecting the correct connection configuration helps prevent leaks and reduces the need for unnecessary adapters.

Unlike disposable filtration cartridges, the B23820.1 uses a separate internal strainer screen that can be replaced when necessary. HHD identifies replacement screen 5003064.004 for this model, allowing technicians to service the screening component without automatically replacing the complete brass strainer assembly.

During routine maintenance, the water supply should be shut off and pressure relieved before the strainer is opened or disconnected. The screen should be inspected for accumulated sediment, damage, or restrictions, and the assembly should be serviced according to the equipment manufacturer's instructions.

For restaurants, convenience stores, cafeterias, and other commercial foodservice operations, maintaining consistent water delivery is important for dependable coffee brewer performance. A clogged or damaged strainer can contribute to reduced water flow, making periodic inspection and proper replacement an important part of preventive maintenance.

The B23820.1 provides a practical replacement option for equipment using the specified Bunn or Newco strainer references. However, equipment configurations and connection arrangements can vary, so technicians should verify the original part number and fitting specifications before ordering.

Related HHD Strainers and Replacement Parts

Holiday House Distributing offers additional water strainers and replacement components for commercial beverage equipment. Select the appropriate model based on the equipment requirements, connection size, and original part number.

HHD 5003064.004 - Replacement Screen for HHD B23820.1 Brass Strainer
HHD B23820.1A - Brass Strainer, 1/4 Inch Male Flare with Screen
HHD S - Inline Water Strainer, 1/4 Inch MPT, 65 Micron Stainless Steel Screen
HHD Y - Y-Strainer, 1/4 Inch, 140 Micron Stainless Steel Screen
HHD Y6 - Y-Strainer, 3/8 Inch, 140 Micron Stainless Steel Screen

California Proposition 65 Information

HHD identifies this product as certified lead-free brass and states that it meets applicable potable water requirements. For additional California Proposition 65 information, visit Holiday House Distributing Proposition 65 Warning Information.

The HHD B23820.1 Brass Water Strainer provides a compact sediment screening solution for compatible commercial coffee brewing equipment. Its brass construction, internal screen, available replacement screen, and HHD-listed Bunn and Newco cross-references make it a practical choice for equipment maintenance. Verify the part number, flare connection configuration, dimensions, and equipment compatibility before ordering.
  1. Home
  2. Valves
  3. Strainers Back Flow Valves
  4. HHD B23820.1 Brass Water Strainer - 1/4 Inch Male Flare with Screen
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart