Aquabeve IW210R Bottled Water Cooler Hot/Cold

  • Model: Aquabeve IW210R
  • Manufactured by: AquaBeve

$324.95

Add to Cart:
Free shipping to the USA lower 48 states. The Aquabeve IW210R Bottled Water Cooler is a hot and cold hydration solution built for offices, breakrooms, waiting areas, and commercial environments that require consistent everyday performance. Sharing the same upgraded internal architecture as the IW210R; featuring stainless steel hot and cold tanks, a reinforced refrigeration system, and improved structural supports. Finished in a modern black exterior. The result is a reliable, low-maintenance bottled water cooler that performs across both customer-facing and back-of-house environments.

Key Features

2.0L / 0.53-gallon stainless steel hot tank with stainless steel fittings between the hot and cold tanks for durability and sanitation.
3.78L / 1.0-gallon polished stainless steel cold tank with laser-welded joints and seams for dependable chilled-water performance.
"D" shaped copper evaporator tubing increases tank contact surface area to improve cold water performance and recovery.
Evaporator copper tubing thickness increased by 33% to improve longevity and resistance to refrigerant leaks.
Dispense point is 4 inches higher than previous configurations, providing easier bottle and cup clearance during use.
Aluminum silicate fiber blanket insulation on the hot tank helps prevent dry burn and improves insulation efficiency.
Upgraded internal supports improve structural durability and help reduce shipping and handling damage.
Larger rear cabinet opening allows easier chassis access for service and maintenance.
No external base plate; updated lock-in baffle and baffle nut design provide improved internal stability.
No Leak EZ-Fill patented no-spill adapter is designed for use with no-spill bottle caps and features increased strength and structure to eliminate cracking.
Clean white finish suitable for modern offices, retail environments, and commercial spaces.
Cup dispenser optional.

Technical Specifications

Product Type: Bottled water cooler, hot and cold
Model: IW210R
Voltage: 110V / 115V / 220V
Frequency: 50/60 Hz
Power Consumption: 4.89A / 554W / 115V
Cold Power Consumption: 1.44A / 118W / 115V
Hot Power Consumption: 3.87A / 449W / 115V
Energy Use: 0.86 kWh / 24 hrs.
Average Hot Water Temperature at Nozzle: 167F +/- 9F cut-in / 187F +/- 4F cut-out
Hot Water Flow Rate: 0.67 – 0.73 oz./sec
Hot Tank Size: 2.0L
Heat Band Wattage: 450W
Average Cold Water Temperature at Nozzle: 45.87F cut-in / 42.2F cut-out
Cold Water Flow Rate: 1.4 oz./sec
Cold Tank Size / Usable Volume / Below Baffle Volume: 3.78L / 2.08L / 1.51L : 1 gal. / 0.55 gal. / 0.4 gal.
Unit Dimensions (W x D x H): 12.4 x 13.78 x 42.91 inches
Boxed Dimensions (W x D x H): 13 x 13.9 x 43.9 inches
Net Weight: 31 lbs.
Gross Weight: 33 lbs.
Dispense Height: 32.5 inches
Max Distance from Drip Tray to Faucet: 7.8 inches

Certifications & Standards

The IW210R is third-party safety certified through Intertek and carries the ETL Listed mark, confirming compliance with applicable North American electrical product safety standards.

Use Cases

This bottled water cooler is well-suited for:

Office breakrooms, reception areas, and administrative spaces that need dependable hot and cold bottled water dispensing.
Healthcare, wellness, and waiting-room environments where clean presentation and reliable daily hydration access are important.
Retail counters, service departments, and showroom spaces that benefit from a polished freestanding water solution.
Light commercial, warehouse office, and back-of-house settings that need a durable cooler with straightforward service access.
General workplace hydration programs using standard bottled water service with no-spill bottle caps.

Compatibility

The IW210R is designed for use with standard bottled water applications and includes a No Leak EZ-Fill no-spill adapter for use with no-spill bottle caps. It is well suited for 3 and 5-gallon bottled water setups commonly used in office coffee service, workplace hydration, and commercial water delivery programs. An optional cup dispenser is also available.

Certifications and Compliance

The ETL Listed mark indicates the product has been tested by Intertek and found in compliance with accepted national standards. The unit's stainless steel hot and cold tanks, reinforced internal support structure, and upgraded evaporator tubing support dependable long-term operation in commercial beverage and workplace hydration environments.

Warranty

Models IB210R and IW210R include a 3-year warranty on the sealed refrigeration system and a 2-year warranty on parts, including electrical components such as cold controls, relay overloads, and PCBs .
  1. Home
  2. Water Coolers
  3. Bottled Water Coolers
  4. Aquabeve IW210R Bottled Water Cooler Hot/Cold
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart