Aquabeve IB215R POU Filtration Cooler Hot/Cold

  • Model: Aquabeve IB215R
  • Manufactured by: AquaBeve

$339.95

Add to Cart:
Free shipping to the USA lower 48 states. The Aquabeve IB215R Filtration Cooler is a direct-plumbed hot and cold hydration solution built for offices, breakrooms, and commercial environments that require consistent filtered water without bottled supply. This model shares the same upgraded internal architecture as the IB215R; featuring stainless steel hot and cold tanks, a reinforced refrigeration system, and improved structural supports. Finished in a clean white exterior. The result is a reliable, low-maintenance point-of-use cooler that performs across both customer-facing and back-of-house environments.

Key Features

2.0L / 0.53-gallon stainless steel hot tank with stainless steel fittings between the hot and cold tanks for durability and sanitation.
3.78L / 1.0-gallon polished stainless steel cold tank with laser-welded joints and seams for dependable chilled-water performance.
"D" shaped copper evaporator tubing increases tank contact surface area to improve cold water performance and recovery.
Evaporator copper tubing thickness increased by 33% to improve longevity and resistance to refrigerant leaks.
Dispense point is 4 inches higher than previous configurations, providing easier bottle and cup clearance during use.
Aluminum silicate fiber blanket insulation on the hot tank helps prevent dry burn and improves insulation efficiency.
Upgraded internal supports improve structural durability and help reduce shipping and handling damage.
Dual mechanical float system enhances reliability and water level control in direct-plumb applications.
Larger rear cabinet opening allows easier chassis access for service and maintenance.
No external base plate; updated lock-in baffle and baffle nut design provide improved internal stability.
Sleek black finish suitable for modern offices, retail environments, and commercial spaces.
Cup dispenser optional.

Technical Specifications

Product Type: Filtration water cooler, hot and cold (point-of-use)
Model: IB215R
Voltage: 110V / 115V / 220V
Frequency: 50/60 Hz
Power Consumption: 4.89A / 554W / 115V
Cold Power Consumption: 1.44A / 118W / 115V
Hot Power Consumption: 3.87A / 449W / 115V
Energy Use: 0.86 kWh / 24 hrs.
Average Hot Water Temperature at Nozzle: 167F +/- 9F cut-in / 187F +/- 4F cut-out
Hot Water Flow Rate: 0.67 – 0.73 oz./sec
Hot Tank Size: 2.0L
Heat Band Wattage: 450W
Average Cold Water Temperature at Nozzle: 45.87F cut-in / 42.2F cut-out
Cold Water Flow Rate: 1.4 oz./sec
Cold Tank Size / Usable Volume / Below Baffle Volume: 3.78L / 2.08L / 1.51L : 1 gal. / 0.55 gal. / 0.4 gal.
Unit Dimensions (W x D x H): 12.4 x 13.78 x 42.91 inches
Boxed Dimensions (W x D x H): 13 x 13.9 x 43.9 inches
Net Weight: 31 lbs.
Gross Weight: 33 lbs.
Dispense Height: 32.5 inches
Max Distance from Drip Tray to Faucet: 7.8 inches

Certifications & Standards

The IB215R is third-party safety certified through Intertek and carries the eTL Listed mark, confirming compliance with applicable North American electrical product safety standards.

Use Cases

This filtration water cooler is well-suited for:

Office environments and breakrooms requiring a direct-plumbed, bottle-free hydration solution.
Healthcare, wellness, and waiting-room spaces where consistent, filtered hot and cold water access is required.
Retail and customer-facing environments that benefit from a clean, modern aesthetic and continuous water supply.
Commercial and light industrial spaces where eliminating bottled water handling improves operational efficiency.
Workplace hydration programs transitioning from bottled systems to point-of-use filtration.

Compatibility

The IB215R is designed for direct water line connection and is compatible with standard point-of-use filtration setups. Installation requires connection to a potable water supply. Filtration components are typically installed inline based on site requirements. An optional cup dispenser is also available.

Certifications and Compliance

The ETL Listed mark indicates the product has been tested by Intertek and found in compliance with accepted national standards. The unit's stainless steel hot and cold tanks, dual mechanical float system, and reinforced evaporator tubing support dependable long-term operation in commercial beverage and workplace hydration environments.

Warranty

Models IB215R and IW215R include a 3-year warranty on the sealed refrigeration system and a 2-year warranty on parts, including electrical components such as cold controls, relay overloads, and PCBs.
  1. Home
  2. Water Coolers
  3. Point of Use (POU) Water Coolers
  4. Aquabeve IB215R POU Filtration Cooler Hot/Cold
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart