The Eltek WB Water Block is a mechanical water overflow safety valve designed to help protect commercial coffee brewers, beverage dispensers, water filtration systems, and other water-fed equipment from excessive continuous water flow. Manufactured by ELTEK Group, the Water Block measures the volume of water passing through the valve and automatically shuts off the water supply when the preset maximum continuous flow volume is exceeded.
The Eltek Water Block can be adjusted to control continuous water flow between 1.3 and 13.2 gallons. If the water volume exceeds the selected setting, the valve stops the flow and remains closed until manually reset. During normal operating cycles, when the preset volume is not exceeded, the Water Block mechanically resets its measured volume and is ready for the next cycle. The valve operates entirely through water flow and requires no electricity or batteries.
Features Mechanical water overflow safety valve
Helps reduce excessive water discharge from water-fed equipment
Adjustable continuous flow volume from 1.3 to 13.2 gallons
Automatically shuts off water when the preset volume is exceeded
Remains closed following safety activation until manually reset
Automatically resets measured water volume during normal operating cycles
Requires no electricity, batteries, or electronic controls
Operates mechanically using water flow
3/4 Inch Male Garden Hose Thread inlet
3/4 Inch Female Garden Hose Thread outlet
Suitable for compatible commercial beverage and water filtration installations
Designed for vertical installation only
Specifications Manufacturer: ELTEK Group
Part Number: WB
Product Type: Mechanical Water Overflow Safety Valve
Continuous Flow Control Range: 1.3 to 13.2 Gallons
Burst Pressure: 725 PSI
Maximum Static Pressure: 145 PSI
Minimum Flow Rate: 0.5 GPM
Maximum Water Temperature: 158 F
Inlet Connection: 3/4 Inch Male Garden Hose Thread (MGH)
Outlet Connection: 3/4 Inch Female Garden Hose Thread (FGH)
Rated Service Life: Approximately 80,000 Gallons
Power Requirements: None
Installation Orientation: Vertical Only
Product Configuration: Individual Water Block Valve
Common Applications Commercial coffee brewing equipment
Automatic-fill coffee brewers
Commercial beverage dispensing systems
Water filtration systems
Office coffee service equipment
Restaurant and convenience store beverage stations
Water-fed equipment with controlled filling cycles
Equipment requiring maximum continuous water volume protection
Water Block Operation The Eltek Water Block measures the volume of water passing through the valve during each continuous flow cycle. The maximum allowable volume can be adjusted between 1.3 and 13.2 gallons to accommodate the normal operating requirements of the connected equipment.
When the water volume remains below the selected limit, the Water Block mechanically resets its measurement and prepares for the next operating cycle. If the volume exceeds the selected limit, the valve automatically shuts off the water supply and maintains that safety condition until user intervention.
Before resetting the Water Block following a safety shutoff, the water supply system should be inspected to determine why excessive water flow occurred. Any leaking fittings, failed inlet valves, or other equipment problems should be corrected before restoring operation.
Installation Information The Water Block must be installed vertically and according to the manufacturer's instructions. The adjustable shutoff volume should be selected based on the normal water consumption of the connected equipment to avoid unnecessary shutoffs during routine brewing, filling, or dispensing cycles.
The valve features a 3/4 Inch Male Garden Hose Thread inlet and a 3/4 Inch Female Garden Hose Thread outlet. Additional adapters, fittings, tubing, or other installation components may be required depending on the equipment and water supply configuration.
The Water Block responds to excessive continuous water flow rather than detecting moisture or standing water. It does not replace a conventional leak detection system and may not stop small leaks or intermittent water loss that remains below the selected shutoff volume.
Related Products Eltek WBRD - Water Block Reset Device
Eltek WBK2 - Water Block Safety Flow Kit with Copper Tube Elbow, Shutoff Valve, and Reset Device
Eltek WBK3 - Water Block Safety Flow Kit with 36 Inch Braided Line and Reset Device
Eltek WBK4 - Water Block Safety Flow Kit with 36 Inch Braided Line, Shutoff Valve, and Reset Device
Eltek WBK6 - Water Block Safety Flow Kit with Copper Tube Elbow and Shutoff Valve
Eltek WBK7 - Water Block Safety Flow Kit with 36 Inch Braided Line
Eltek WBK8 - Water Block Safety Flow Kit with 36 Inch Braided Line and Shutoff Valve
Manufacturer Videos Eltek Water Block - Video Overview Eltek Water Block - How It Works Important Product Information This listing is for the individual Eltek WB Water Block mechanical safety valve. Complete Water Block installation kits are available separately for applications requiring additional connection fittings, shutoff valves, braided water supply lines, or reset accessories. Verify the included components for your installation before ordering.
The Eltek WB Water Block provides a practical mechanical safeguard for commercial beverage equipment connected to a pressurized water supply. A malfunctioning inlet valve, damaged fitting, or other plumbing problem can allow water to flow continuously, potentially causing equipment damage and costly cleanup. By limiting the maximum continuous volume delivered to the equipment, the Water Block helps reduce the amount of water released during certain water system failures.
For equipment technicians and commercial coffee service operators, the individual WB valve is a convenient replacement option when the existing Water Block needs to be replaced but the installation fittings and other accessories remain serviceable. Its mechanical operation eliminates the need for electrical connections, batteries, or electronic controls.
Verify the 3/4 Inch Male Garden Hose Thread inlet, 3/4 Inch Female Garden Hose Thread outlet, operating pressure, water flow requirements, and installation orientation before ordering. The Water Block must be installed vertically and adjusted to accommodate the normal water consumption of the connected equipment.