Eltek WBK2 Water Block Safety Flow Kit #2, 3/8 Inch MAX Adapter x 1/4 Inch Quick Connect

  • Model: HHD WBK2
  • Manufactured by: HHD

$97.15

Add to Cart:
The Eltek WBK2 Water Block Safety Flow Kit #2 is a mechanical water overflow protection system designed to help prevent excessive water discharge from commercial coffee brewers, beverage dispensers, water filtration systems, and other water-fed equipment. Manufactured by ELTEK Group, the Water Block monitors the volume of water passing through the valve and automatically shuts off the water supply when the preset continuous flow volume is exceeded.

The WBK2 kit features a 3/8 Inch MAX Adapter inlet and a 1/4 Inch Quick Connect outlet, making it a practical solution for compatible commercial beverage equipment installations. Unlike electrically operated leak detection systems, the Water Block requires no electricity or batteries. Its mechanical design allows the shutoff volume to be adjusted between 1.3 and 13.2 gallons, helping reduce the risk of water damage caused by excessive continuous water flow.

Features

Mechanical water overflow protection system
Automatically shuts off water when the preset continuous flow volume is exceeded
Adjustable shutoff volume from 1.3 to 13.2 gallons
Requires no electricity, batteries, or electronic controls
Automatically resets measured water volume during normal flow cycles
Manual reset required after safety shutoff activation
3/8 Inch MAX Adapter inlet connection
1/4 Inch Quick Connect outlet connection
Includes Water Block reset device and installation fittings
Includes brass ball shutoff valve and copper tube elbow
Includes 2 Inch filter clip
Designed for vertical installation only

Specifications

Manufacturer: ELTEK Group
Part Number: WBK2
Product Type: Water Block Safety Flow Kit #2
Operation: Mechanical Water Flow Monitoring
Adjustable Continuous Flow Volume: 1.3 to 13.2 Gallons
Burst Pressure: 725 PSI
Maximum Static Pressure: 145 PSI
Minimum Flow Rate: 0.5 GPM
Maximum Water Temperature: 158 F
Water Block Inlet: 3/4 Inch Male Garden Hose Thread
Water Block Outlet: 3/4 Inch Female Garden Hose Thread
Kit Inlet Connection: 3/8 Inch MAX Adapter
Kit Outlet Connection: 1/4 Inch Quick Connect
Rated Service Life: Approximately 80,000 Gallons
Power Requirements: None
Installation Orientation: Vertical Only

Kit Includes

(1) WB - Water Block Safety Valve with Key and Assembly Instructions
(1) WBRD - Water Block Reset Device
(1) MGH6C - Male Garden Hose Adapter with 3/8 Inch Compression
(1) LGH4 - Liquifit 1/4 Inch Quick Connect x 3/4 Inch Garden Hose Fitting
(1) CTE6-2 - 3/8 Inch x 2 Inch Copper Tube Elbow
(1) MAXBV6 - 3/8 Inch MAX Adapter Ball Valve x Compression
(1) OC - 2 Inch Filter Clip

Common Applications

Commercial coffee brewing equipment
Automatic-fill coffee brewers
Commercial beverage dispensing systems
Water filtration systems with compatible connections
Office coffee service equipment
Restaurant and convenience store beverage stations
Water-fed equipment requiring continuous flow protection
Commercial beverage equipment installations

Installation Information

The Eltek Water Block must be installed in a vertical position for proper operation. The adjustable shutoff volume should be selected according to the normal water consumption of the connected equipment. If the volume of water passing through the valve continuously exceeds the selected limit, the Water Block shuts off the water supply and requires manual resetting before water flow can resume.

The WBK2 includes the necessary adapter fittings for its specified 3/8 Inch MAX Adapter inlet and 1/4 Inch Quick Connect outlet configuration. The included brass ball valve provides a convenient manual water shutoff point, while the copper tube elbow and filter clip support installation in compatible beverage equipment water supply arrangements.

The Water Block is designed to detect excessive continuous water flow rather than moisture or standing water. It does not replace a conventional leak detection system and may not stop small leaks or intermittent water loss that remains below the selected shutoff volume.

The Eltek WBK2 Water Block Safety Flow Kit provides an additional layer of water protection for commercial beverage equipment connected to a pressurized water supply. A leaking fitting, failed inlet valve, or other water system malfunction can allow water to flow continuously, potentially causing equipment damage and costly cleanup. By limiting the maximum continuous volume of water delivered to the equipment, the Water Block helps reduce the amount of water released during certain plumbing or equipment failures.

For coffee service operators, restaurants, offices, and convenience stores, the WBK2 offers a practical mechanical safety solution without electrical connections or ongoing power requirements. The complete seven-component kit provides the Water Block valve, reset device, connection fittings, ball shutoff valve, copper tube elbow, and filter clip needed for the specified installation configuration.

Verify the 3/8 Inch MAX Adapter inlet, 1/4 Inch Quick Connect outlet, operating pressure, water flow requirements, and available installation space before ordering. The Water Block must be installed vertically and adjusted to accommodate the normal water consumption of the connected equipment.

Customers who bought this product also purchased...

  1. Home
  2. Accessories
  3. Eltek WBK2 Water Block Safety Flow Kit #2, 3/8 Inch MAX Adapter x 1/4 Inch Quick Connect
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart