HHD TC717 Oetiker One Ear Hose Clamp .717-.827 Inch

  • Model: HHD TC717
  • Manufactured by: HHD

$0.42

Add to Cart:
The HHD TC717 Oetiker One Ear Hose Clamp is a metal tubing clamp with a specified clamping range of .717 to .827 Inch. Supplied by Holiday House Distributing, this one-ear clamp is designed to help secure compatible flexible tubing to hose barb fittings in commercial coffee equipment, beverage dispensing systems, water filtration installations, and other appropriate fluid-handling applications.

The TC717 features a circular metal band with a raised ear that is compressed using an appropriate Oetiker ear clamp installation tool. When correctly sized and installed, the clamp applies compression around the tubing to help retain it on the mating hose barb fitting. Unlike nylon tubing support clamps that attach water lines to mounting surfaces, the TC717 is designed to secure tubing at the connection itself. This listing is for one individual clamp.

Features

Oetiker one-ear hose clamp design
Specified clamping range of .717 to .827 Inch
Metal band construction
Raised ear for mechanical crimping
Helps secure compatible tubing to hose barb fittings
Compact design without a protruding adjustment screw
Suitable for properly matched flexible tubing connections
Useful for commercial beverage equipment plumbing
Suitable for new installations and replacement assemblies
Designed for installation with an appropriate ear clamp crimping tool

Specifications

Distributor: Holiday House Distributing
Brand: Oetiker
Part Number: TC717
Product Type: One Ear Hose Clamp
Clamp Size Range: .717-.827 Inch
Minimum Listed Diameter: .717 Inch
Maximum Listed Diameter: .827 Inch
Construction: Metal Band
Clamp Style: One Ear Tab
Specific Tubing Compatibility: Not Specified
Installation Method: Mechanical Ear Crimping
Quantity: 1 Clamp

Common Applications

Securing compatible flexible tubing to hose barb fittings
Commercial coffee brewer water line connections
Beverage dispensing equipment plumbing
Water filtration tubing assemblies
Replacement of damaged or previously installed ear clamps
Commercial beverage equipment repair and maintenance
New flexible tubing connections requiring a one-ear clamp
Maintenance of properly matched tubing and fitting assemblies

Related Products

HHD TC113 - Oetiker One Ear Hose Clamp .381-.444 Inch for PT6W/B Tubing
HHD TC123 - Oetiker One Ear Hose Clamp .394-.486 Inch for PT4R/PT4RF Tubing
HHD TC133 - Oetiker One Ear Hose Clamp .453-.524 Inch for PT4R Tubing
HHD TC140 - Oetiker One Ear Hose Clamp .472-.551 Inch
HHD TC157 - Oetiker One Ear Hose Clamp .453-.615 Inch for PT6RF Tubing
HHD TC185 - Oetiker One Ear Hose Clamp .602-.725 Inch for PT6R Tubing

Installation Information

Before installation, verify the outside diameter of the tubing after it is positioned over the hose barb fitting. The TC717 has a specified clamping range of .717 to .827 Inch. The correct clamp must be selected according to the assembled tubing and fitting dimensions rather than the nominal tubing inside diameter alone.

Slide the clamp over the tubing before inserting the hose barb fitting. Fully seat the tubing onto the appropriate fitting according to the tubing and fitting manufacturer's instructions, then position the clamp over the intended clamping area. Make sure the clamp is properly located on the tubing and is not positioned over the end of the fitting.

Use an appropriate Oetiker ear clamp installation tool to compress the raised ear according to the manufacturer's recommended procedure. Apply the specified compression without damaging the clamp, tubing, or fitting. Do not use ordinary pliers as a substitute unless the tool manufacturer specifically approves their use.

One-ear clamps are generally intended for permanent installation rather than repeated adjustment. A clamp that has already been crimped should not be assumed suitable for reuse. When rebuilding a connection, use a new correctly sized clamp and inspect the tubing and fitting for damage.

After installation, examine the crimped ear and surrounding tubing for improper positioning, deformation, or damage. Restore the water supply and check the completed connection for leaks under the equipment's normal operating conditions.

The HHD TC717 provides a compact clamping solution for properly matched flexible beverage tubing connections. Commercial coffee brewers, beverage dispensers, and water filtration systems frequently use hose barb fittings to connect flexible water lines to internal components. A properly selected and installed clamp helps retain the tubing at these connection points.

The one-ear design differs from conventional worm-drive hose clamps, which use a screw mechanism for tightening. Instead, the TC717 uses a raised metal ear that is compressed during installation. This design eliminates the protruding adjustment screw found on many conventional hose clamps and can be useful where available space is limited.

Clamp sizing is especially important when working with different beverage tubing materials. Flexible tubing products may have different wall thicknesses and outside diameters even when their nominal sizes appear similar. The outside diameter can also change when tubing is expanded over a hose barb fitting. For this reason, the assembled connection must be evaluated when selecting the correct clamp.

The TC717 has a specified .717-.827 Inch clamping range, but Holiday House Distributing has not identified a particular tubing part number in the available product information. Customers should select this clamp based on the dimensions of their tubing and fitting assembly rather than assuming compatibility with a specific tubing family.

The TC717 and TC185 have slightly overlapping clamping ranges, but they are not identical. The TC185 covers .602-.725 Inch and is identified for PT6R tubing, while the TC717 covers .717-.827 Inch without a confirmed tubing designation. Although the ranges overlap between .717 and .725 Inch, the correct clamp depends on the assembled tubing diameter and the manufacturer's installation requirements.

Compared with the smaller TC113, TC123, TC133, TC140, and TC157 clamps, the TC717 covers a larger specified diameter range. This makes it an option for appropriately sized tubing and hose barb assemblies that fall outside the ranges of the smaller clamps. However, the actual assembled diameter must still be verified, and a larger clamp should not be selected solely because it appears easier to install.

Unlike the HHD TC4, TC6, TC8, and TC12 nylon tubing support clamps, the TC717 is intended for securing compatible tubing connections rather than mounting tubing to a cabinet or equipment panel. It should also not be confused with the KR-series ferrules, which require their own specified crimping tools and installation procedures.

When replacing an existing ear clamp, inspect the hose barb fitting for corrosion, damage, or wear and examine the tubing for cracking, hardening, stretching, or deformation. Installing a new clamp on damaged tubing may not restore a reliable connection. Replace worn components as needed before assembling the joint.

For commercial beverage equipment technicians, keeping properly sized ear clamps available can simplify routine tubing replacement and plumbing repairs. The TC717 is useful when servicing compatible tubing assemblies requiring a clamp within the .717 to .827 Inch range, particularly when a larger diameter is needed than the smaller clamps in the series accommodate.

Whether assembling a new beverage tubing connection or replacing an existing clamp during equipment maintenance, the Holiday House Distributing TC717 Oetiker One Ear Hose Clamp provides a specified .717-.827 Inch clamping range for properly matched tubing and hose barb applications.

Verify the assembled tubing outside diameter, .717-.827 Inch clamp range, hose barb fitting dimensions, installation tool requirements, and equipment operating conditions before ordering. This listing is for one HHD TC717 Oetiker One Ear Hose Clamp. Tubing, fittings, and installation tools are not included.
  1. Home
  2. Fittings
  3. Hose Barb Accessories
  4. OETIKER One Ear Tab Clamps
  5. HHD TC717 Oetiker One Ear Hose Clamp .717-.827 Inch
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart