HHD TC87 Oetiker One Tab Ear Hose Clamp 8.7 mm

  • Model: HHD TC87
  • Manufactured by: HHD

$0.42

Add to Cart:
The HHD TC87 Oetiker One Tab Ear Hose Clamp is a compact metal tubing clamp with a manufacturer-listed size designation of 8.7 mm, approximately .343 Inch. Supplied by Holiday House Distributing, this clamp is designed to help secure appropriately sized flexible tubing to hose barb fittings in commercial coffee equipment, beverage dispensing systems, water filtration installations, and other compatible fluid-handling applications.

The TC87 features a one tab ear clamp design that is mechanically compressed during installation to help retain flexible tubing on a properly matched hose barb fitting. Unlike adjustable screw-type hose clamps, this style uses a raised crimping ear and a compact metal band without a protruding adjustment screw. The TC87 is identified as an Oetiker One Tab Clamp rather than a stepless clamp. This listing is for one individual clamp.

Features

Oetiker one tab ear clamp design
Manufacturer-listed 8.7 mm size designation
Approximate inch equivalent of .343 Inch
Raised tab for mechanical crimping
Metal band construction
Compact design without an adjustment screw
Helps secure compatible flexible tubing to hose barb fittings
Suitable for properly matched commercial beverage equipment connections
Useful for replacement tubing assemblies and equipment maintenance
Designed for installation with an appropriate ear clamp crimping tool
Single-use style intended for replacement after removal

Specifications

Distributor: Holiday House Distributing
Brand: Oetiker
Part Number: TC87
Product Type: One Tab Ear Hose Clamp
Manufacturer-Listed Size: 8.7 mm
Approximate Inch Equivalent: .343 Inch
Minimum Clamping Diameter: Not Specified
Maximum Clamping Diameter: Not Specified
Clamp Design: One Tab Ear Clamp
Construction: Metal Band
Installation Method: Mechanical Ear Crimping
Specific Tubing Part Number: Not Specified
Quantity: 1 Clamp

Common Applications

Securing appropriately sized flexible tubing to hose barb fittings
Commercial coffee brewer water line connections
Beverage dispensing equipment plumbing
Water filtration system tubing assemblies
Replacement of previously installed ear clamps
Commercial beverage equipment repair and maintenance
New flexible tubing and hose barb connections
Maintenance of properly matched tubing and fitting assemblies

Related Products

HHD TC105 - Oetiker One Tab Ear Hose Clamp 10.5 mm
HHD OC9.5 - Oetiker Stepless Ear Hose Clamp 9.5 mm
HHD OC10.9 - Oetiker Stepless Ear Hose Clamp .362-.429 Inch

Installation Information

Before installation, verify the tubing and hose barb assembly dimensions. Holiday House Distributing identifies the TC87 with an 8.7 mm size designation but does not provide a separate minimum and maximum clamping range in the available product information. The listed size should not be interpreted as a confirmed tubing outside diameter or complete installation range.

Measure the outside diameter of the tubing at the intended clamping location after accounting for the hose barb fitting. The tubing material, wall thickness, fitting dimensions, and manufacturer's recommended clamp size should all be considered when selecting the correct clamp.

Slide the clamp over the tubing before inserting the hose barb fitting. Fully seat the tubing onto the appropriate fitting according to the tubing and fitting manufacturer's instructions. Position the clamp over the intended clamping area, making sure it is properly aligned and does not extend beyond the end of the fitting.

Use an appropriate Oetiker ear clamp installation tool to compress the raised tab according to the manufacturer's recommended procedure. The ear should be compressed evenly without damaging the tubing or fitting. Proper tool selection and installation technique are important for achieving the intended clamping force.

One tab ear clamps are generally intended for permanent installation rather than repeated adjustment. Once the tab has been compressed, the clamp should not be assumed suitable for reuse. When servicing or rebuilding a tubing connection, replace the previously crimped clamp with a new correctly sized clamp.

After installation, inspect the clamp for proper positioning, tab compression, and visible damage. Restore the water supply and check the completed connection for leaks under the equipment's normal operating conditions.

The HHD TC87 provides a compact clamping solution for flexible tubing connections where an appropriately sized one tab ear clamp is specified. Its simple metal band design allows the clamp to be installed in locations where a protruding screw-type clamp mechanism may be undesirable.

Commercial coffee brewers and beverage dispensing equipment often contain flexible tubing connections between pumps, valves, fittings, and other plumbing components. These connections may use hose barb fittings that require a properly sized clamp to help retain the tubing during normal equipment operation.

The Oetiker one tab design differs from the stepless clamp construction used in the OC-series products. Both styles use an ear that is mechanically compressed during installation, but the stepless design incorporates an overlapping inner-band arrangement intended to provide a more continuous internal clamping surface. The TC87 should be selected when its one tab design and size are appropriate for the intended connection.

Holiday House Distributing identifies the TC87 by its 8.7 mm size designation. This converts to approximately .343 Inch, but the conversion does not establish the complete usable clamping range. Customers should verify the manufacturer's specifications and the actual tubing assembly dimensions before selecting this clamp.

Flexible tubing can vary in outside diameter depending on the material, wall thickness, and manufacturer. Tubing may also expand when installed over a hose barb fitting. For this reason, the nominal tubing inside diameter alone should not be used to determine the correct clamp size.

The HHD TC105 is another Oetiker One Tab Clamp, identified by a 10.5 mm size designation. Although the TC87 and TC105 share the same general clamp style, their different size designations mean they should not be treated as interchangeable without confirming the intended connection dimensions.

The OC9.5 and OC10.9 are nearby Oetiker stepless clamp options. These clamps use a different internal band design from the TC87. Customers replacing an existing clamp should confirm whether the equipment calls for a conventional one tab clamp or a stepless design rather than selecting an alternative solely by its nominal diameter.

Unlike nylon tubing support clips that secure water lines to mounting surfaces, the TC87 is intended to help secure compatible tubing directly to hose barb fittings. It is also different from compression fittings and crimp ferrules, which have their own installation methods and dimensional requirements.

When replacing a damaged or previously installed clamp, inspect the flexible tubing for cracking, hardening, stretching, or other signs of deterioration. Check the hose barb fitting for wear, corrosion, or damage. A new clamp may not restore a reliable connection if the tubing or fitting itself is defective.

For commercial beverage equipment technicians, keeping appropriately sized Oetiker one tab clamps available can simplify routine tubing replacement and plumbing repairs. The TC87 offers an 8.7 mm size option for maintenance work involving compatible flexible tubing and hose barb assemblies.

Whether assembling a new tubing connection or replacing an existing clamp during equipment maintenance, the Holiday House Distributing TC87 Oetiker One Tab Ear Hose Clamp provides a compact mechanical clamping solution for properly matched commercial beverage equipment plumbing applications.

Verify the manufacturer's 8.7 mm size designation, assembled tubing outside diameter, hose barb fitting dimensions, installation tool requirements, and equipment operating conditions before ordering. This listing is for one HHD TC87 Oetiker One Tab Ear Hose Clamp. Tubing, fittings, and installation tools are not included.
  1. Home
  2. Fittings
  3. Hose Barb Accessories
  4. OETIKER One Ear Tab Clamps
  5. HHD TC87 Oetiker One Tab Ear Hose Clamp 8.7 mm
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart