HHD SI6 Scale Interceptor - 3/8 Inch Straight Inline Scale Control Device

  • Model: HHD SI6
  • Manufactured by: HHD

$59.95

Add to Cart:
The HHD SI6 Scale Interceptor from Holiday House Distributing is an inline ionic scale-control device designed to help reduce mineral scale buildup in commercial coffee brewers, espresso equipment, and other compatible water-processing systems. Designed for 3/8-inch water-line applications, the SI6 features a straight connection configuration and provides a scale-control solution for equipment requiring a higher water flow rate than smaller 1/4-inch installations.

Using permanently energized rare-earth-metal ionic induction technology, the SI6 is designed to help reduce the adhesion of calcium and magnesium mineral deposits inside water-fed equipment. This chemical-free scale-control solution requires no batteries, external electrical power, replacement cartridges, or chemical replenishment. Proper installation, grounding, filtration, and flow-rate sizing are essential for effective operation.

Features

Inline ionic scale-control device for commercial water equipment
3/8-inch straight connection configuration
Designed for compatible commercial beverage equipment water lines
Recommended flow rate of 0.5 to 2.5 GPM
Uses permanently energized rare-earth-metal ionic induction technology
Designed to help reduce calcium and magnesium scale adhesion
Requires no external electrical power or batteries
No replacement cartridges or scale-treatment chemicals required
Designed to help reduce scale-related maintenance and equipment downtime
Suitable for properly sized commercial beverage equipment installations

Specifications

Manufacturer: Holiday House Distributing
Part Number: SI6
Product Type: Inline Ionic Scale Interceptor
Configuration: Straight Connection
Nominal Connection Size: 3/8 Inch
Recommended Flow Rate: 0.5 to 2.5 GPM
Published Maximum Water Hardness: 50 Grains Per Gallon
Published Maximum Operating Temperature: 300 F
Scale-Control Method: Permanently Energized Rare-Earth-Metal Ionic Inducer
Chemical Treatment: None
Replaceable Cartridge: None
External Electrical Power: Not Required
Grounding: Connection to Supplied Grounding Connector Required
Application: Commercial Beverage Equipment Scale Control

Installation Requirements

1. MUST use clean, filtered water.
2. MUST be sized properly for the equipment's water flow rate.
3. MUST be grounded using the supplied grounding connector.
4. MUST be installed in the proper water-flow direction.

The Scale Interceptor should be installed on clean equipment. Existing mineral deposits should be removed before installation to help prevent loosened scale from creating equipment problems.

Confirm the equipment's flow rate, water-line size, installation clearance, and plumbing configuration before selecting the SI6. The SI6 is the straight-connection model; installations requiring an elbow configuration should be evaluated for the SI6E.

Common Applications

Commercial coffee brewers with compatible 3/8-inch water connections
Espresso and cappuccino equipment within the specified flow range
Commercial beverage dispensers
Point-of-use water coolers
Compatible steamers and water-processing equipment
Preventive maintenance programs in hard-water locations
Commercial beverage installations requiring higher water flow rates

Why Choose This Scale Interceptor

Mineral scale accumulation can contribute to heating inefficiency, restricted water flow, and additional maintenance in commercial beverage equipment. The HHD SI6 is designed to help control scale formation without requiring chemical treatment cartridges or ongoing chemical replenishment.

For commercial beverage equipment operating in hard-water areas, proper scale management can help reduce maintenance concerns and support reliable equipment operation. With its 3/8-inch straight connection and recommended flow rate of 0.5 to 2.5 GPM, the SI6 provides an option for equipment requiring greater water flow than smaller 1/4-inch applications.

Unlike conventional water filters, the SI6 does not remove sediment, chlorine, or other contaminants. It is a scale-control device and must be used with clean, filtered water. Any filtration required by the equipment manufacturer must remain in place.

Related Products

HHD SI6E - Scale Interceptor 3/8 Inch Elbow
HHD SI4 - Scale Interceptor 1/4 Inch Straight
HHD SI4E - Scale Interceptor 1/4 Inch Elbow

The SI6E provides an elbow configuration for compatible 3/8-inch installations. The SI4 and SI4E offer smaller 1/4-inch connection options for equipment with lower flow requirements. Select the appropriate model based on connection size, required flow rate, and available installation space.

The HHD SI6 is intended to help control mineral scale formation and is not a substitute for required water filtration or equipment maintenance. Performance depends on water conditions and proper installation. Verify connection dimensions, flow rate, grounding requirements, and water-flow direction before ordering.
  1. Home
  2. Miscellaneous Equipment
  3. HHD SI6 Scale Interceptor - 3/8 Inch Straight Inline Scale Control Device
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart