HHD SI6E Scale Interceptor - 3/8 Inch Elbow Inline Scale Control Device

  • Model: HHD SI6E
  • Manufactured by: HHD

$59.95

Add to Cart:
The HHD SI6E Scale Interceptor from Holiday House Distributing is an inline ionic scale-control device designed to help reduce mineral scale buildup in commercial coffee brewers, espresso equipment, and other compatible water-processing systems. Featuring a 3/8-inch elbow connection configuration, the SI6E provides an alternative to the straight SI6 model for installations where water-line routing or available space requires an angled connection.

Using permanently energized rare-earth-metal ionic induction technology, the SI6E is designed to help reduce the adhesion of calcium and magnesium mineral deposits inside water-fed equipment. This chemical-free scale-control solution requires no batteries, external electrical power, replacement cartridges, or chemical replenishment. Proper installation, grounding, filtration, and flow-rate sizing are essential for effective operation.

Features

Inline ionic scale-control device for commercial water equipment
3/8-inch elbow connection configuration
Designed for compatible commercial beverage equipment water lines
Angled configuration for installations requiring an elbow connection
Uses permanently energized rare-earth-metal ionic induction technology
Designed to help reduce calcium and magnesium scale adhesion
Requires no external electrical power or batteries
No replacement cartridges or scale-treatment chemicals required
Designed to help reduce scale-related maintenance and equipment downtime
Provides an alternative to the straight HHD SI6 model

Specifications

Manufacturer: Holiday House Distributing
Part Number: SI6E
Product Type: Inline Ionic Scale Interceptor
Configuration: Elbow Connection
Nominal Connection Size: 3/8 Inch
Published Maximum Water Hardness: 50 Grains Per Gallon
Published Maximum Operating Temperature: 300 F
Scale-Control Method: Permanently Energized Rare-Earth-Metal Ionic Inducer
Chemical Treatment: None
Replaceable Cartridge: None
External Electrical Power: Not Required
Grounding: Connection to Supplied Grounding Connector Required
Application: Commercial Beverage Equipment Scale Control

Installation Requirements

1. MUST use clean, filtered water.
2. MUST be sized properly for the equipment's water flow rate.
3. MUST be grounded using the supplied grounding connector.
4. MUST be installed in the proper water-flow direction.

The Scale Interceptor should be installed on clean equipment. Existing mineral deposits should be removed before installation to help prevent loosened scale from creating equipment problems.

Confirm the equipment's required flow rate, connection dimensions, installation clearance, and plumbing configuration before selecting the SI6E. The elbow design is intended for applications requiring an angled water-line connection rather than the straight configuration of the SI6.

Common Applications

Commercial coffee brewers with compatible 3/8-inch water connections
Espresso and cappuccino equipment
Commercial beverage dispensers
Point-of-use water coolers
Compatible steamers and water-processing equipment
Equipment installations requiring an elbow connection
Preventive maintenance programs in hard-water locations

Why Choose This Scale Interceptor

Mineral scale accumulation can contribute to heating inefficiency, restricted water flow, and additional maintenance in commercial beverage equipment. The HHD SI6E is designed to help control scale formation without requiring chemical treatment cartridges or ongoing chemical replenishment.

The 3/8-inch elbow configuration provides an installation option where a straight inline connection may not be practical. This can be particularly useful when water lines must change direction near equipment connections or when available installation space is limited.

For businesses operating coffee brewers and other water-fed equipment in hard-water areas, proper scale management can help reduce maintenance concerns and support reliable equipment operation. The SI6E offers a compact scale-control option when the equipment's connection size, flow requirements, and plumbing arrangement are compatible.

Unlike conventional water filters, the SI6E does not remove sediment, chlorine, or other contaminants. It is a scale-control device and must be used with clean, filtered water. Any filtration required by the equipment manufacturer must remain in place.

Related Products

HHD SI6 - Scale Interceptor 3/8 Inch Straight
HHD SI4 - Scale Interceptor 1/4 Inch Straight
HHD SI4E - Scale Interceptor 1/4 Inch Elbow

The SI6 provides a straight connection for compatible 3/8-inch installations. The SI4 and SI4E offer smaller 1/4-inch connection options for equipment with lower flow requirements. Select the appropriate model based on connection size, required flow rate, and available installation space.

The HHD SI6E is intended to help control mineral scale formation and is not a substitute for required water filtration or equipment maintenance. Performance depends on water conditions and proper installation. Verify connection dimensions, flow rate, grounding requirements, and water-flow direction before ordering.
  1. Home
  2. Miscellaneous Equipment
  3. HHD SI6E Scale Interceptor - 3/8 Inch Elbow Inline Scale Control Device
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart