HHD KR450 Hose Barb Ferrule .450 Inch ID for PT4RF Reinforced Tubing

  • Model: HHD KR450
  • Manufactured by: HHD

$0.52

Add to Cart:
The HHD KR450 Ferrule is a .450 Inch inside diameter tubing ferrule designed for use with Holiday House Distributing PT4RF 1/4 Inch braid-reinforced PVC beverage tubing. This cylindrical retaining sleeve is used with compatible hose barb fittings to help secure reinforced tubing connections in commercial coffee equipment, beverage dispensing systems, water filtration installations, and other suitable water supply applications.

Holiday House Distributing PT4RF tubing has a nominal 1/4 Inch inside diameter and .438 Inch outside diameter. The KR450 ferrule has a .450 Inch inside diameter, allowing it to fit over the specified tubing before assembly. When installed using the appropriate crimping tool and procedure, the ferrule helps retain the tubing on a compatible hose barb fitting. The HHD FCT6245 Ferrule Crimper Tool is specifically identified for use with KR450 and KR625 ferrules.

Features

Designed for HHD PT4RF braid-reinforced PVC beverage tubing
.450 Inch ferrule inside diameter
Compatible with specified .438 Inch outside diameter tubing
Cylindrical retaining sleeve configuration
Used with compatible hose barb and tubing assemblies
Helps secure reinforced tubing connections when properly crimped
Compatible with HHD FCT6245 Ferrule Crimper Tool
Compact component for commercial beverage equipment plumbing
Suitable for replacement and new tubing assembly applications

Specifications

Manufacturer: Holiday House Distributing
Part Number: KR450
Product Type: Tubing Ferrule
Ferrule Inside Diameter: .450 Inch
Compatible Tubing: HHD PT4RF
Compatible Tubing Inside Diameter: 1/4 Inch
Compatible Tubing Outside Diameter: .438 Inch
Compatible Tubing Material: Braid-Reinforced PVC
Compatible Crimper Tool: HHD FCT6245
Configuration: Cylindrical Sleeve
Ferrule Material: Not Specified

Common Applications

Commercial coffee brewer water supply tubing
Beverage dispensing equipment plumbing
Braid-reinforced PVC tubing connections
Water filtration system tubing assemblies
Compatible hose barb connections
Replacement of damaged or previously installed ferrules
Maintenance of PT4RF beverage tubing assemblies
Commercial beverage equipment repair and installation

Related Products

HHD PT4RF-300 - 1/4 Inch Braid-Reinforced PVC Beverage Tubing
HHD FCT6245 - Ferrule Crimper Tool for KR450 and KR625 Ferrules
HHD KR625 - .625 Inch ID Ferrule for PT6RF Tubing
HHD KR650 - .650 Inch ID Ferrule for PT6R Tubing
HHD HBS4 - 1/4 Inch Brass Hose Barb Splicer
HHD HBT4 - 1/4 Inch Brass Hose Barb Tee

Installation Information

The HHD KR450 ferrule is designed for use with PT4RF braid-reinforced PVC beverage tubing. Before installation, verify that the tubing has the specified .438 Inch outside diameter and that the mating hose barb fitting is suitable for the intended assembly.

Position the ferrule over the tubing and assemble the connection using the appropriate hose barb fitting. Use the HHD FCT6245 Ferrule Crimper Tool, which is specifically listed for use with KR450 and KR625 ferrules. Follow the manufacturer's crimping instructions to secure the tubing connection properly.

Do not substitute ordinary pliers or an improvised crimping method for the specified installation tool. An improperly compressed ferrule may not provide adequate tubing retention and could allow the connection to leak or separate under pressure.

Inspect the tubing for cracks, hardening, deformation, or other damage before installation. Replace damaged tubing and fittings as needed. After crimping, inspect the completed connection and check for leaks under normal equipment operating conditions.

The HHD KR450 is a small but important component in compatible reinforced beverage tubing assemblies. When a tubing connection must be rebuilt or a previously installed ferrule has been damaged during removal, selecting the correct replacement ferrule helps maintain the intended connection configuration.

Understanding the difference between tubing inside diameter and outside diameter is important when selecting ferrules. PT4RF tubing has a nominal 1/4 Inch inside diameter for use with compatible hose barb fittings, while its .438 Inch outside diameter determines the tubing size that must fit within the ferrule.

The KR450 has a .450 Inch inside diameter, providing clearance over the specified .438 Inch outside diameter tubing before crimping. Proper installation with the appropriate crimper helps compress the ferrule around the tubing and mating fitting. The ferrule's dimensions alone do not establish the pressure rating or suitability of the completed assembly.

The Holiday House Distributing FCT6245 Ferrule Crimper Tool is a useful companion product for technicians and maintenance personnel working with KR450 and KR625 ferrules. Having the specified crimping tool available helps support consistent installation practices when assembling compatible reinforced tubing connections.

Holiday House Distributing also offers KR625 and KR650 ferrules for other reinforced tubing sizes. The KR625 is identified for PT6RF tubing, while the KR650 is identified for PT6R tubing. These ferrules have different inside diameters and should not be considered interchangeable with KR450. The FCT6245 tool is specifically identified for KR450 and KR625; compatibility with KR650 has not been confirmed.

Commercial coffee brewers, beverage dispensers, and water filtration systems often contain numerous flexible tubing connections. Using the correct retaining components and installation tools during maintenance or replacement can help preserve the intended tubing assembly and reduce problems associated with mismatched or improperly secured parts.

Whether assembling a new beverage tubing connection or replacing a ferrule during equipment maintenance, the Holiday House Distributing KR450 provides the specified .450 Inch inside diameter retaining sleeve for compatible PT4RF 1/4 Inch braid-reinforced PVC beverage tubing.

Verify the .450 Inch ferrule inside diameter, PT4RF tubing compatibility, .438 Inch tubing outside diameter, mating hose barb fitting, installation method, and equipment operating conditions before ordering. This listing is for the HHD KR450 ferrule only. Tubing, fittings, and the FCT6245 Ferrule Crimper Tool are sold separately.
  1. Home
  2. Fittings
  3. Hose Barb Accessories
  4. Ferrules
  5. HHD KR450 Hose Barb Ferrule .450 Inch ID for PT4RF Reinforced Tubing
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart