HHD KR650 Hose Barb Ferrule .650 Inch ID for PT6R Tubing

  • Model: HHD KR650
  • Manufactured by: HHD

$0.60

Add to Cart:
The HHD KR650 Ferrule is a .650 Inch inside diameter tubing ferrule designed for use with Holiday House Distributing PT6R beverage tubing. This cylindrical retaining sleeve is used with compatible hose barb fittings to help secure flexible tubing connections in commercial coffee equipment, beverage dispensing systems, water filtration installations, and other suitable water supply applications.

Supplied by Holiday House Distributing, the KR650 is specifically identified for use with PT6R tubing. Its .650 Inch inside diameter is an important specification when selecting a ferrule for an existing tubing assembly or constructing a new connection. When installed using the appropriate crimping method and compatible equipment, the ferrule helps retain the tubing on its mating hose barb fitting. Holiday House Distributing identifies the FCT6247 Ferrule Crimper Tool as the correct tool for KR650 ferrules.

Features

Designed for HHD PT6R beverage tubing
.650 Inch ferrule inside diameter
Cylindrical retaining sleeve configuration
Used with compatible hose barb and tubing assemblies
Helps secure tubing connections when properly crimped
Compatible with HHD FCT6247 Ferrule Crimper Tool
Compact component for commercial beverage equipment plumbing
Suitable for replacement and new tubing assembly applications
Specifically identified for the PT6R tubing family
Useful for maintaining compatible commercial beverage water lines

Specifications

Manufacturer: Holiday House Distributing
Part Number: KR650
Product Type: Tubing Ferrule
Ferrule Inside Diameter: .650 Inch
Compatible Tubing: HHD PT6R
Configuration: Cylindrical Sleeve
Ferrule Material: Not Specified
Compatible Crimping Tool: HHD FCT6247
Category: Hose Barb Accessories - Ferrules

Common Applications

Commercial coffee brewer water supply tubing
Beverage dispensing equipment plumbing
Compatible PT6R tubing connections
Water filtration system tubing assemblies
Flexible tubing and hose barb connections
Replacement of damaged or previously installed ferrules
Maintenance of PT6R tubing assemblies
Commercial beverage equipment repair and installation
New tubing connections requiring the specified ferrule

Related Products

HHD PT6R - Compatible Beverage Tubing
HHD FCT6247 - Ferrule Crimper Tool for .475 and .650 Inch Ferrules
HHD KR625 - .625 Inch ID Ferrule for PT6RF Tubing
HHD KR450 - .450 Inch ID Ferrule for PT4RF Tubing
HHD HBS6 - 3/8 Inch Brass Hose Barb Splicer
HHD HBT6 - 3/8 Inch Brass Hose Barb Tee
HHD HBMP66 - 3/8 Inch Hose Barb x 3/8 Inch Male Pipe Thread Adapter

Installation Information

The HHD KR650 ferrule is designed for use with PT6R beverage tubing and an appropriate hose barb fitting. Before installation, verify the tubing outside diameter, ferrule inside diameter, and mating fitting specifications to ensure the components are properly matched.

Position the ferrule over the tubing and assemble the connection using the appropriate hose barb fitting. Use the HHD FCT6247 Ferrule Crimper Tool, which Holiday House Distributing specifically identifies for KR650 and KR475 ferrules. Follow the manufacturer's installation instructions and recommended crimping procedure to secure the tubing connection properly.

Do not substitute ordinary pliers or an improvised crimping method for the specified installation tool. An improperly secured ferrule may not provide adequate tubing retention and could allow the connection to leak or separate under pressure.

Inspect the tubing for cracks, hardening, deformation, or other damage before installation. Replace damaged tubing and fittings as needed. After crimping the ferrule, inspect the completed connection and check for leaks under normal equipment operating conditions.

The HHD KR650 is a small but important component in compatible beverage tubing assemblies. When an existing tubing connection must be rebuilt or a previously installed ferrule has been damaged during removal, selecting the correct replacement ferrule helps maintain the intended connection configuration.

Understanding the difference between tubing inside diameter, tubing outside diameter, and ferrule inside diameter is important when selecting retaining components. The .650 Inch measurement identifies the inside diameter of the KR650 ferrule and should not be confused with the nominal inside diameter of the tubing itself.

The KR650 is specifically identified for PT6R tubing. Although its inside diameter is close to that of the KR625 ferrule, the two parts are associated with different tubing products. KR625 has a .625 Inch inside diameter and is intended for PT6RF tubing, while KR650 has a .650 Inch inside diameter and is intended for PT6R tubing.

The difference of .025 Inch between KR625 and KR650 may appear small, but ferrule selection depends on the dimensions of the complete tubing and fitting assembly. Using an incorrectly sized ferrule can affect installation and tubing retention. These ferrules should not be treated as interchangeable without manufacturer confirmation.

Holiday House Distributing identifies two different ferrule crimper tools for these applications. The FCT6245 is designed for KR450 and KR625 ferrules, while the FCT6247 is designed for KR475 and KR650 ferrules. Selecting the correct crimper helps ensure that the ferrule is compressed using the intended jaw configuration.

Commercial coffee brewers, beverage dispensers, and water filtration systems frequently use flexible tubing to connect internal components and water supply fittings. Properly secured tubing connections are important for maintaining dependable equipment operation and reducing the possibility of leaks during normal service.

When replacing a ferrule on an existing PT6R tubing assembly, inspect the hose barb fitting and tubing condition before installing the new retaining sleeve. A new ferrule should not be used to compensate for damaged tubing, an incorrect fitting size, or an improperly assembled connection.

The KR650 provides a replacement option for technicians maintaining compatible PT6R tubing connections. Its specified .650 Inch inside diameter helps distinguish it from other ferrules in the Holiday House Distributing product line and assists with selecting the correct component during equipment service.

For technicians regularly working with PT6R tubing, the HHD FCT6247 Ferrule Crimper Tool is a useful companion product. Having the correct crimper available allows replacement tubing assemblies to be secured using the tool specified for KR650 ferrules rather than relying on general-purpose pliers.

Whether assembling a new beverage tubing connection or replacing a ferrule during commercial equipment maintenance, the Holiday House Distributing KR650 provides the specified .650 Inch inside diameter retaining sleeve for compatible PT6R tubing applications.

Verify the .650 Inch ferrule inside diameter, PT6R tubing compatibility, mating hose barb fitting, FCT6247 crimper compatibility, and equipment operating conditions before ordering. This listing is for the HHD KR650 ferrule only. Tubing, fittings, and the FCT6247 Ferrule Crimper Tool are sold separately.
  1. Home
  2. Fittings
  3. Hose Barb Accessories
  4. Ferrules
  5. HHD KR650 Hose Barb Ferrule .650 Inch ID for PT6R Tubing
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart