HHD KR625 Hose Barb Ferrule .625 Inch ID for PT6RF Reinforced Tubing

  • Model: HHD KR625
  • Manufactured by: HHD

$0.60

Add to Cart:
The HHD KR625 Ferrule is a .625 Inch inside diameter tubing ferrule designed for use with Holiday House Distributing PT6RF reinforced beverage tubing. This cylindrical retaining sleeve is used with compatible hose barb fittings to help secure reinforced tubing connections in commercial coffee equipment, beverage dispensing systems, water filtration installations, and other suitable water supply applications.

Supplied by Holiday House Distributing, the KR625 is specifically identified for use with PT6RF tubing. Its .625 Inch inside diameter is an important consideration when selecting the correct ferrule for a tubing assembly. When installed using the appropriate crimping tool and procedure, the ferrule helps retain the tubing on a compatible hose barb fitting. The HHD FCT6245 Ferrule Crimper Tool is identified for use with both KR450 and KR625 ferrules.

Features

Designed for HHD PT6RF reinforced beverage tubing
.625 Inch ferrule inside diameter
Cylindrical retaining sleeve configuration
Used with compatible hose barb and tubing assemblies
Helps secure reinforced tubing connections when properly crimped
Compatible with HHD FCT6245 Ferrule Crimper Tool
Compact component for commercial beverage equipment plumbing
Suitable for replacement and new tubing assembly applications
Designed for use with the specified PT6RF tubing family

Specifications

Manufacturer: Holiday House Distributing
Part Number: KR625
Product Type: Tubing Ferrule
Ferrule Inside Diameter: .625 Inch
Compatible Tubing: HHD PT6RF
Compatible Crimper Tool: HHD FCT6245
Configuration: Cylindrical Sleeve
Ferrule Material: Not Specified
Category: Hose Barb Accessories - Ferrules

Common Applications

Commercial coffee brewer water supply tubing
Beverage dispensing equipment plumbing
Reinforced beverage tubing connections
Water filtration system tubing assemblies
Compatible hose barb connections
Replacement of damaged or previously installed ferrules
Maintenance of PT6RF tubing assemblies
Commercial beverage equipment repair and installation
New reinforced tubing connections requiring the specified ferrule

Related Products

HHD PT6RF - Compatible Reinforced Beverage Tubing
HHD FCT6245 - Ferrule Crimper Tool for KR450 and KR625 Ferrules
HHD KR450 - .450 Inch ID Ferrule for PT4RF Tubing
HHD KR650 - .650 Inch ID Ferrule for PT6R Tubing
HHD HBS6 - 3/8 Inch Brass Hose Barb Splicer
HHD HBT6 - 3/8 Inch Brass Hose Barb Tee

Installation Information

The HHD KR625 ferrule is designed for use with PT6RF reinforced beverage tubing. Before installation, verify the tubing outside diameter, ferrule inside diameter, and mating hose barb fitting to ensure the components are properly matched.

Position the ferrule over the tubing and assemble the connection using the appropriate hose barb fitting. Use the HHD FCT6245 Ferrule Crimper Tool, which is specifically identified for use with KR450 and KR625 ferrules. Follow the manufacturer's crimping instructions to secure the tubing connection properly.

Do not substitute ordinary pliers or an improvised crimping method for the specified installation tool. An improperly compressed ferrule may not provide adequate tubing retention and could allow the connection to leak or separate under pressure.

Inspect the tubing for cracks, hardening, deformation, or other damage before installation. Replace damaged tubing and fittings as needed. After crimping, inspect the completed connection and check for leaks under normal equipment operating conditions.

The HHD KR625 is a small but important component in compatible reinforced beverage tubing assemblies. When a tubing connection must be rebuilt or a previously installed ferrule has been damaged during removal, selecting the correct replacement ferrule helps maintain the intended connection configuration.

Understanding the difference between tubing inside diameter, tubing outside diameter, and ferrule inside diameter is important when selecting retaining components. The .625 Inch measurement identifies the inside diameter of the KR625 ferrule and should not be confused with the nominal inside diameter of the tubing itself.

The KR625 is specifically identified for PT6RF reinforced tubing. The tubing must fit within the ferrule before crimping, and the completed connection must be secured using the appropriate installation procedure. Ferrule dimensions alone do not establish the pressure rating or suitability of the completed assembly.

The Holiday House Distributing FCT6245 Ferrule Crimper Tool is a useful companion product for technicians and maintenance personnel working with KR450 and KR625 ferrules. Having the specified crimping tool available helps support consistent installation practices when assembling compatible reinforced tubing connections.

Holiday House Distributing also offers the KR450 and KR650 ferrules for other tubing sizes. The KR450 has a .450 Inch inside diameter and is identified for PT4RF tubing, while the KR650 has a .650 Inch inside diameter and is identified for PT6R tubing. Although KR625 and KR650 are relatively close in size, they are intended for different tubing products and should not be considered interchangeable without manufacturer confirmation.

Commercial coffee brewers, beverage dispensers, and water filtration systems often contain numerous flexible tubing connections. Using the correct retaining components and installation tools during maintenance or replacement can help preserve the intended tubing assembly and reduce problems associated with mismatched or improperly secured parts.

When replacing a ferrule on an existing PT6RF tubing assembly, inspect the hose barb fitting and tubing condition before installing the new retaining sleeve. A new ferrule should not be used to compensate for damaged tubing, an incorrect fitting size, or an improperly assembled connection.

Whether assembling a new beverage tubing connection or replacing a ferrule during equipment maintenance, the Holiday House Distributing KR625 provides the specified .625 Inch inside diameter retaining sleeve for compatible PT6RF reinforced beverage tubing.

Verify the .625 Inch ferrule inside diameter, PT6RF tubing compatibility, mating hose barb fitting, required crimping method, and equipment operating conditions before ordering. This listing is for the HHD KR625 ferrule only. Tubing, fittings, and the FCT6245 Ferrule Crimper Tool are sold separately.
  1. Home
  2. Fittings
  3. Hose Barb Accessories
  4. Ferrules
  5. HHD KR625 Hose Barb Ferrule .625 Inch ID for PT6RF Reinforced Tubing
Copyright © 2026 Discount Coffee Equipment. Powered by Zen Cart